61
ª
Installation of ArcSoft Software Suite
1
Insert the supplied CD-ROM into the personal computer’s
CD-ROM drive.
2
Select the software to be installed from [Setup Menu].
3
Select the desired language on the
[Choose Setup Language] dialogue, and click [OK].
≥
Installation begins.
≥
After reading the displayed contents, please carry out the installation
according to instructions.
≥
If a language other than the OS language is selected, the characters
may not be presented correctly.
4
When the component selection screen is displayed, check
the software to be installed and click [Next].
5
After the completion of setup, click on [Finish]
≥
Installation will be completed.
≥
This instruction manual describes only the procedures for installation,
connection and start-up. Please read the Help messages of your software
for how to use the ArcSoft Software Suite.
ª
To start software in the ArcSoft Software Suite:
1
Select [Start] >> [All Programs (Programs)] >>
[ArcSoft Software Suite] >> [ArcSoft Panorama Maker 3.0]
(or [ArcSoft PhotoBase 4.0] or [ArcSoft PhotoImpression
4.0] or [ArcSoft PhotoPrinter 4.0]).
Refer to Help information about application operations and other Error
messages.
For Information on ArcSoft Software:
TEL:
1-510-440-9901
FAX:
1-510-440-1270
Web Site:
www.arcsoft.com
E-mail: [email protected]
2
1
4
5
PV-DV953P.book 61 ページ ２００３年１月１６日 木曜日 午後６時５４分
