Panasonic PV-DV953, Operating Instructions Manual

Page: 27 / 176

27
EIS EIS
MEGA
OPTICAL IMAGE
STABILIZER
1, 3
MEGA
1 2
OF
F O
N MODE
2
2
PHOTO
SHOT
1 2
1, 3
FADE
OF
F O
N MODE
2
Optical Image Stabilizer Function
If you are recording in unstable situations and the Palmcorder is shaky, you
can use this function to correct for camera shake in these images.
≥
If the Palmcorder shakes too much, this function may not be able to stabilize
images being recorded.
1
Press the [OPTICAL IMAGE STABILIZER] Button until the
[EIS] Indication
1
appears.
2
Press the Recording Start/Stop Button or [PHOTO SHOT]
Button to start recording.
MEGA EIS (Optical Image Stabilizer) Function
This function increases the effect. MEGA EIS (Optical Image Stabilizer)
Function will only work when performing Card Photo Shot Function. We
recommend MEGA EIS for Card PhotoShot Function.
3
Press the [OPTICAL IMAGE STABILIZER] Button repeatedly
until the [
EIS] Indication
2
appears.
To Cancel the Optical Image Stabilizer Function
Press the [OPTICAL IMAGE STABILIZER] Button repeatedly until neither of
the [EIS] nor the [
EIS] Indication appears.
≥
Under fluorescent lighting, image brightness may change or colors may not
look natural.
≥
After-images may appear.
≥
We recommend that you turn off the Image Stabilizer Function when a
Tripod is in use.
~~~~~~~~~~~~~~~~~~~~~~~~~
Fade In/Out Functions
Fade In
1
Fade In brings out images and sounds gradually from a black screen at the
beginning of a scene.
1
Hold down the [FADE] Button while the Palmcorder is set to
the Recording Pause Mode.
≥
The image fades out gradually.
2
When the image is completely gone, press the Recording
Start/Stop Button to start recording.
3
Release the [FADE] Button about 3 seconds after starting
recording.
≥
The image reappears gradually.
Fade Out
2
Fade Out causes images and sounds to disappear gradually, leaving a black
screen at the end of a scene.
1
Hold down the [FADE] Button while recording.
≥
The image fades out gradually.
2
About 3 seconds after the image is completely gone, press
the recording Start/Stop Button to stop recording.
3
Release the [FADE] Button.
≥
Fading-in and fading-out cannot be used when recording still pictures in the
PhotoShot Mode, Digital Still Picture Mode, Multi-Picture Mode, and for the
small still picture in the Picture-in-Picture Mode.
MEGA
MEGA
PV-DV953P.book 27 ページ ２００３年１月１６日 木曜日 午後６時５４分