Panasonic PV-D4733S-K, Service Manual

Page: 137 / 274

B. Install the DVD Main C.B.A. with the Locking Tab and the rib.
C. Solder portions "a," "b," "c" and "d" on the DVD Sub C.B.A.
Note:
Solder portions "a" and "b" while pushing down the DVD Sub C.B.A.
securely at below 330 C for less than 3 seconds.
D. Connect the F.P.C.s to Connectors P8901, P8801 on the DVD Main
C.B.A.
Fig. D4
5. Installation of Mechanism Chassis and Cassette Up Ass’y onto Main
C.B.A.
A. Make sure the Mode Select SW. on the Main C.B.A. is in EJECT
position. If not, rotate the Mode Select SW. until the alignment
projection is in the EJECT Position.
Fig. D5
B. Install the Mechanism Chassis and Cassette Up Ass’y straight onto
the Main C.B.A. so that the Sensor LED clears the hole in the
Mechanism Chassis and that 2 Connectors (P4001, P6201) are
aligned and seated securely.
6. Connection of Mechanism Chassis
Connect the Flat Cables. Then, install the A/C Shield Plate as shown.
Fig. D6
25