4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[COUNT UP]
Displays the elapsed time since the count was started.
[COUNT DOWN]
Displays the remaining time of the time set by [TIMER].
Setting the countdown timer
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The
[P-TIMER]
screen is displayed.
3) Press
as
to select [TIMER].
4) Press
qw
to set the time.
f
The time can be set in 1-minute increments from 1 to 180 minutes.
f
The factory default value is 10 minutes.
Note
f
[TIMER] can be set when [MODE] is set to [COUNT DOWN].
Using the presentation timer
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The
[P-TIMER]
screen is displayed.
3) Press
as
to select the item, and press the <ENTER> button.
[START]
The count is started.
[STOP]
The count is stopped.
[RESTART]
The count is resumed.
[RESET]
The count is reset.
[EXIT]
The presentation timer function is ended.
f
When [START] or [RESTART] is selected, the elapsed time or the remaining time is displayed at the lower
right of the projected image.
f
When [STOP] is selected, the elapsed time or the remaining time when the count was stopped is displayed
at the lower right of the projected image.
Note
f
Presentation timer operations are also possible by the <P-TIMER> button on the remote control.
(
x
page 61)
f
The security message set in the [SECURITY] menu → [TEXT DISPLAY]
(
x
page 101)
is not displayed when the elapsed time or remaining
time is displayed.
f
The elapsed time or remaining time is not displayed when the menu screen is displayed.
f
The start time becomes "000:00" when [MODE] is set to [COUNT UP].
f
The start time becomes the value set at [TIMER] when [MODE] is set to [COUNT DOWN].
f
The time gauge turns clockwise when [COUNT UP] is set, and turns counterclockwise when [COUNT DOWN] is set.
[UNIFORMITY]
Color unevenness may change depending on the zoom position of the lens. Change the setting according to the
zoom position so that color unevenness is minimized.
1) Press
as
to select [UNIFORMITY].
2) Press the <ENTER> button.
f
The
[UNIFORMITY]
screen is displayed.
3) Press
qw
to adjust the zoom correction.
f
The items will switch each time you press the button.
[0]
Select [0] when the lens is at the wide end (W) for the best color unevenness correction.
[1] - [7]
Select from [1] to [7] for the best color unevenness correction.
[8]
Select [8] when the lens is at the tele end (T) for the best color unevenness correction.
86 -
ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu