background image

CAUTION (North/Middle/South America/Taiwan)

This equipment is equipped with a three-pin grounding-type power plug. Do not 

remove the grounding pin on the power plug. This plug will only fit a grounding-type 

power outlet. This is a safety feature. If you are unable to insert the plug into the 

outlet, contact an electrician. Do not defeat the purpose of the grounding plug.

Do not remove

WARNING (USA and Canada)

 

z

Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data 

Processing Equipment, ANSI/NFPA 75.

 

z

For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the 

building installation wiring.

 

z

For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily 

accessible.

NOTIFICATION (Canada)

This class A digital apparatus complies with Canadian ICES-003.

FCC NOTICE (USA)

Supplier’s Declaration of Conformity

Model Number:  

PT-VMZ71, PT-VMZ71B, PT-VMZ61, PT-VMZ61B, PT-VMZ51, PT-VMZ51S, PT-VMW61,

 

                                  PT-VMW51

Trade Name:  

Panasonic

Responsible Party:   Panasonic Corporation of North America

Address: 

Two Riverfront Plaza, Newark, NJ 07102-5490

General Contact:  

http://www.panasonic.com/support

Projector Contact:   https://panasonic.net/cns/projector/

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation.

Caution:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 

when the equipment is operated in a commercial environment. This equipment generates, uses, and can 

radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may 

cause harmful interference to radio communications. Operation of this equipment in a residential area is likely 

to cause harmful interference in which case the user will be required to correct the interference at his own 

expense.

FCC Warning:

To assure continued compliance, follow the attached installation instructions. This includes using the provided 

power cord and shielded interface cables when connecting to computer or peripheral devices. Also, any 

unauthorized changes or modifications to this equipment could void the user’s authority to operate this device.

Read this first!

6 -

 

ENGLISH

Summary of Contents for PT-VMZ51











































































































































































Reviews: