Displaying internal test pattern
(Not available for the remote control supplied with PT-VMZ51S and PT-VMZ41)
To confirm the status of the projector, six types of internal test patterns can be displayed. To display test patterns,
perform the following steps.
button
1) Press the <TEST PATTERN> button.
2) Press
qw
to select the test pattern.
Note
f
Setting is also available from the [PROJECTOR SETUP] menu → [TEST PATTERN].
(
x
page 96)
f
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing
various adjustments.
Using the status function
Display the status of the projector.
button
1) Press the <STATUS> button.
f
The
[STATUS]
screen is displayed.
PT-VMZ71
PROJECTOR SETUP
SELECT
RETURN
ASSIGNED FUNCTION:
DISABLE
NO SIGNAL
0 H
STATUS
SIGNAL
NAME
FREQUENCY
RUNTIME
LIGHT RUNTIME
PROJECTOR
CONTINUOUS LIGHTING TIME
SERIAL NUMBER
PROJECTOR
0.00kHz/ 0.00Hz
0 H
1 H
000000000
1/2
Note
f
The projector status can also be displayed using the menu operation. Refer to the [PROJECTOR SETUP] menu
→
[STATUS]
(
x
page 89)
for details.
Using the ECO management function
(Not available for the remote control supplied with PT-VMZ51S and PT-VMZ41)
Display the setting screen relating to ECO management.
button
1) Press the <ECO> button.
Note
f
Refer to the [PROJECTOR SETUP] menu
→
[ECO MANAGEMENT]
(
x
page 90)
for details.
Using the HDMI-CEC function
Display the HDMI-CEC operation screen.
62 -
ENGLISH
Chapter 3 Basic Operations - Operating with the remote control
