Note
f
The magnification is not displayed in the moving screen.
f
The digital zoom function is canceled if the input signal changes during a digital zoom.
f
During a digital zoom, the freeze function is disabled.
f
The digital zoom function may not work properly for some computer signals.
Switching the image aspect ratio
Switch the image aspect ratio according to the input.
button
1) Press the <ASPECT> button.
f
The setting will change each time you press the button.
Note
f
Refer to the [POSITION] menu
→
[ASPECT]
(
x
page 79)
for details.
Using the presentation timer function
The presentation timer can be operated.
The presentation can be performed while confirming the elapsed time or remaining time against the specified
time.
button
1) Press the <P-TIMER> button.
f
The count is started.
2) Press the <P-TIMER> button again.
f
The count is stopped.
Note
f
The elapsed time or the remaining time is displayed at the lower right of the projected image when using the presentation timer function.
f
The count will be resumed from interruption when the <P-TIMER> button is pressed.
f
The presentation timer function will be terminated by pressing the <P-TIMER> button for over three seconds.
f
For details about the setting of the presentation timer function, refer to the [DISPLAY OPTION] menu → [P-TIMER].
(
x
page 85)
Using the FUNCTION button
Some frequently used menu items can be assigned to the <FUNCTION> button on the remote control so that it
can be used as an shortcut button.
button
1) Press the <FUNCTION> button.
Assigning functions to the <FUNCTION> button
1)
Press the <MENU> button to display the menu items (main menu, sub menu, or details menu) to be
assigned.
f
Refer to
“Navigating through the menu” (
x
page 65)
for the operation of the menu.
2) Press and hold the <FUNCTION> button for three seconds or more.
Note
f
After the setting, the assigned menu items will be displayed as [ASSIGNED FUNCTION] in the operation guide under the menu.
f
To cancel the function assignment, use the [PROJECTOR SETUP] menu → [FUNCTION BUTTON].
(
x
page 94)
ENGLISH
-
61
Chapter 3 Basic Operations - Operating with the remote control
