Model No.
[SCREEN FORMAT]
The available items to set when [SCREEN POSITION] is selected
PT-TMZ400, PT-TMW380
[16:10]
Cannot be set.
[16:9]
Three items of [CENTER], [HIGH] and [LOW] can be selected for
vertical position.
[4:3]
Three items of [CENTER], [LEFT] and [RIGHT] can be selected for
horizontal position.
PT-TMX380
[4:3]
Cannot be set.
[16:9]
Three items of [CENTER], [HIGH] and [LOW] can be selected for
vertical position.
[16:10]
5) Press
as
to select [SCREEN POSITION].
f
In the following cases, the [SCREEN POSITION] cannot be changed.
g
For PT-TMZ400 and PT-TMW380, [SCREEN FORMAT] is set to [16:10].
g
For PT-TMX380, [SCREEN FORMAT] is set to [4:3].
6) Press
qw
to set the screen position.
[STARTUP LOGO]
Set the logo display when the power is turned on.
1) Press
as
to select [STARTUP LOGO].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[DEFAULT LOGO]
Displays the Panasonic logo.
[USER LOGO]
Displays the image registered by the user.
[OFF]
Disables the startup logo display.
Note
f
When [USER LOGO] is selected, the display of the startup logo will be kept for approximately 15 seconds.
f
To create/register the [USER LOGO] image, use “Logo Transfer Software”. The software can be downloaded from the Website
(https://panasonic.net/cns/projector/).
f
If the [PROJECTOR SETUP] menu
→
[ECO MANAGEMENT]
→
[QUICK STARTUP] is set to [ON], the startup logo is not displayed when
projection starts before the specified time elapses after the projector enters the standby mode.
The specified time is a time set in the [PROJECTOR SETUP] menu
→
[ECO MANAGEMENT]
→
[QUICK STARTUP]
→
[VALID PERIOD].
[SHUTTER SETTING]
Enable/disable the shutter function automatically (shutter: closed/open) when the power is turned on.
1) Press
as
to select [SHUTTER SETTING].
2) Press the <ENTER> button.
f
The
[SHUTTER SETTING]
screen is displayed.
3) Press
as
to select [STARTUP].
4) Press
qw
to switch the item.
[OFF]
Starts projection with the shutter function disabled (shutter: open) when the power is turned on.
[ON]
Starts projection with the shutter function enabled (shutter: closed) when the power is turned on.
[AUTO SETUP SETTING]
Set the automatic execution of AUTO SETUP.
Dot clock, clock phase and image position can be adjusted automatically without pressing the <AUTO SETUP>
button each time when unregistered signals are input frequently at meetings, etc.
1) Press
as
to select [AUTO SETUP SETTING].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
ENGLISH
-
79
Chapter 4 Settings - [DISPLAY OPTION] menu
