Note
f
Pressing the <MENU> button while the menu screen is displayed will return to the previous menu. You can operate in the same way by
pressing the <RETURN> button.
f
Some items or functions may not be adjusted or used depending on the signals input to the projector. When the items cannot be adjusted or
used, the items in the menu screen are shown in gray characters, and they cannot be adjusted or set.
If the item in the menu screen is displayed in gray characters and the item cannot be adjusted or set, the factor causing it is displayed by
pressing the <ENTER> button while the corresponding menu is selected.
f
Some items can be adjusted even if signals are not input.
f
Individual adjustment screen disappears automatically if no operation is performed within approximately five seconds.
f
For menu items, refer to “Main menu” (
x
page 60) and “Sub menu” (
x
page 60).
Resetting adjustment values to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to
the factory default settings.
but
ton
1) Press the <DEFAULT> button on the remote control.
Note
f
You cannot reset all the settings to the factory default at a time.
f
To reset all the settings adjusted in the sub-menu item to the factory default at a time, execute the [PROJECTOR SETUP] menu →
[INITIALIZE ALL].
f
Some items cannot be reset by pressing the <DEFAULT> button on the remote control. Adjust these items individually.
Main menu
The main menu consists of the following seven menu items.
When a main menu item is selected, the cursor moves to its sub menu.
Main-menu item
Page
[PICTURE]
63
[POSITION]
69
[LANGUAGE]
76
[DISPLAY OPTION]
77
[PROJECTOR SETUP]
83
[SECURITY]
94
[NETWORK]
97
Sub menu
You can set and adjust the items in each submenu.
[PICTURE]
Sub-menu item
Factory default
Page
[PICTURE MODE]
[STANDARD]
63
[CONTRAST]
[0]
63
[BRIGHTNESS]
[0]
63
[COLOR]
[0]
64
[TINT]
[0]
64
60 -
ENGLISH
Chapter 4 Settings - On-screen menu