Displaying the Memory Viewer screen
1) Press the <NETWORK/USB> button on the remote control to switch the input source to MEMORY
VIEWER.
f
You can also press the <INPUT SELECT> button on the control panel and select the input source in the
Input menu.
2) Attach the USB memory directly into the <USB (VIEWER/WIRELESS/DC OUT)> terminal.
f
The standby screen “please press ENTER” is displayed while the USB memory icon is displayed at the
lower left of the screen.
3) Press the <ENTER> button on the remote control.
f
The root directory of the USB memory will be displayed in thumbnail on the screen.
Playing the pictures
1) Press
asqw
on the remote control to select a file you want to play on the memory viewer screen.
2) Press the <ENTER> button on the remote control.
f
The picture will display on the full screen.
3) Press
w
to switch to the next picture, press
q
to return to the previous picture.
4) Press the <ENTER> button on the remote control.
f
Return to the thumbnail screen.
Note
f
When the recorded number of pixels is smaller than the maximum number of display dot
*1
, it will be displayed enlarged maintaining the
aspect ratio.
f
When the recorded number of pixels is larger than the maximum number of display dot
*1
, it will be displayed reduced maintaining the aspect
ratio.
f
When the recorded number of pixels is the same as the maximum number of display dot
*1
, it will neither be enlarged nor reduced, so
degradation of image quality can be reduced.
*1
The maximum number of display dot for each product is as follows.
PT-TMZ400: 1 920 x 1 200
PT-TMW380: 1 280 x 800
PT-TMX380: 1 024 x 768
Executing the slide
All pictures in the same folder will play automatically according to the settings of [SORT ORDER], [SLIDE TRANSITION
EFFECT] and so on of the [MEMORY VIEWER] menu.
1) Press
asqw
on the remote control to select a file.
2) Press the <MENU> button to select the [MEMORY VIEWER]
→
[SET SLIDE].
3) Press the <ENTER> button on the remote control.
f
The slideshow will start.
f
Press the <ENTER> button to return to the thumbnail screen.
Note
f
If you press the <MENU> button during playback in the slideshow, the playback will stop and the a menu displays. The playing will continue
when the menu disappears.
Termination of the Memory Viewer
1) Press
asqw
to select the thumbnail
which is displayed on the upper left corner.
2) Press the <ENTER> button on the remote control.
f
Return to the standby screen “please press ENTER”.
Depending on file path length, you may need to repeat Step
1)
and Step
2)
before returning to the standby
screen.
Note
f
You can also exit the Memory Viewer by switching to the input other than MEMORY VIEWER.
108 -
ENGLISH
Chapter 5 Operation of Function - Projecting with MEMORY VIEWER input
