Chapter 4
Settings — [ADVANCED MENU] menu
ENGLISH - 107
[EDGE BLENDING]
The edge blending function allows multiple projector images to be seamlessly overlapped by using the inclination
of the brightness at the overlapped area.
1) Press
as
to select [EDGE BLENDING].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Sets the edge blending function to off.
[ON]
Use the setting value preset in the projector for the inclination of the edge blending area.
[USER]
Use the user-setting value for the inclination of the edge blending area. (Configuration/registration
requires separate software. Consult your dealer.)
f
When anything other than [OFF] is selected, proceed to Step
3)
.
3) Press the <ENTER> button.
f
The
[EDGE BLENDING]
screen is displayed.
4) Press
as
to specify the location to be corrected.
f
When joining at top: Set [UPPER] to [ON]
f
When joining at bottom: Set [LOWER] to [ON]
f
When joining at left: Set [LEFT] to [ON]
f
When joining at right: Set [RIGHT] to [ON]
5) Press
qw
to switch to [ON].
6) Press
as
to select [START] or [WIDTH].
7) Press
qw
to adjust the starting position or correction width.
8) Press
as
to select [MARKER].
9) Press
qw
to switch to [ON].
f
A marker for image position adjustment is displayed. The position where the red and green lines overlap for
the projectors to be joined will be the optimal point. Make sure to set the correction width for the projectors
to be joined with the same value. Optimal joining is not possible with projectors that have different
correction widths.
The optimal point is the point at which these lines overlap.
Green line
Red line
10) Press
as
to select [BRIGHTNESS ADJUST].
11) Press the <ENTER> button.
f
The
[BRIGHTNESS ADJUST]
screen is displayed.
f
By setting [AUTO TESTPATTERN] to [ON] on the
[EDGE BLENDING]
screen, the black test pattern is
displayed when you enter the
[BRIGHTNESS ADJUST]
screen.
12) Press
as
to select [NON-OVERLAPPED BLACK LEVEL].
13) Press the <ENTER> button.
f
The
[NON-OVERLAPPED BLACK LEVEL]
screen is displayed.
f
[RED], [GREEN], and [BLUE] can be adjusted individually if [INTERLOCKED] is set to [OFF].
