Chapter 3
Basic Operations — Projecting
74 - ENGLISH
3) Press the <ENTER> button.
f
The
[PROJECTOR SETUP]
screen is displayed.
4) Press
as
to select [LENS].
5) Press the <ENTER> button.
f
The
[LENS]
screen is displayed.
6) Press
as
to select [LENS HOME POSITION].
7) Press the <ENTER> button.
f
The confirmation screen is displayed.
8) Press
qw
to select [OK], and press the <ENTER> button.
f
[PROGRESS] is displayed in the
[HOME POSITION]
screen, and the projection lens is moved to the origin
position.
Note
f
[LENS HOME POSITION] cannot be executed when the [PROJECTOR SETUP] menu
→
[LENS]
→
[LENS TYPE] is set to [NOT
SELECTED].
f
[LENS HOME POSITION] will not operate correctly when the [PROJECTOR SETUP] menu
→
[LENS]
→
[LENS TYPE] is set incorrectly.
Change the setting if the type is different from the projection lens attached to the projector.
f
The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu
→
[LENS]
→
[LENS CALIBRATION]
is not executed.
f
The home position does not match with the optical image center position.
f
The home position varies depending on the projection lens type. For details, refer to “Lens shift range” (
x
page 75).
f
The home position of the Fixed-focus Lens (Model No.: ET-D75LE95, ET-D75LE90) may deviate from the designed position.
When operating from the lens shift adjustment screen
1) Press the <DEFAULT> button on the remote control while displaying the lens shift adjustment screen.
f
The confirmation screen is displayed.
2) Press
qw
to select [OK], and press the <ENTER> button.
f
[PROGRESS] is displayed in the
[HOME POSITION]
screen, and the projection lens is moved to the origin
position.
Note
f
The
[HOME POSITION]
screen is not displayed when the [PROJECTOR SETUP] menu
→
[LENS]
→
[LENS TYPE] is set to [NOT
SELECTED].
f
The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu
→
[LENS]
→
[LENS TYPE] is set
incorrectly. Change the setting if the type is different from the projection lens attached to the projector.
f
The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu
→
[LENS]
→
[LENS CALIBRATION]
is not executed.
f
The home position varies depending on the projection lens type. For details, refer to “Lens shift range” (
x
page 75).
f
The home position of the Fixed-focus Lens (Model No.: ET-D75LE95, ET-D75LE90) may deviate from the designed position.
f
You can also display the [HOME POSITION] screen by pressing the <LENS> button on the control panel or the <SHIFT> button on the
remote control for three seconds or longer.
