10 - ENGLISH
Read this first!
WARNING:
Do not cover the air intake/exhaust ports or place anything within 500 mm (19-11/16") of them.
Doing so will cause the projector to overheat, which can cause fire or damage to the projector.
f
Do not place the projector in narrow, badly ventilated places.
f
Do not place the projector on cloth or papers, as these materials could be drawn into the air intake port.
Do not look at or place your skin into the light emitted from the lens while the projector is being used.
Do not enter the projection luminous flux using an optical device (such as magnifier or mirror).
Doing so can cause burns or loss of sight.
f
Strong light is emitted from the projector’s lens. Do not look at or place your hands directly into this light.
f
Be especially careful not to let young children look into the lens. In addition, turn off the power and switch
off the main power when you are away from the projector.
Do not project an image with the lens cover of the projection lens (optional) attached.
Doing so can cause fire.
Never attempt to remodel or disassemble the projector.
High voltages can cause fire or electric shocks.
f
For any inspection, adjustment and repair work, please contact an Authorized Service Center.
Doing so may cause exposure to dangerous laser radiation.
f
The laser module is built in this projector. Follow procedures specified in the Operating Instructions to make
operations and adjustments.
Do not touch the top surface of the projector during use.
Doing so may result in burns, as the top surface is hot during use and for a while after use.
Do not allow metal objects, flammable objects, or liquids to enter inside of the projector. Do not allow
the projector to get wet.
Doing so may cause short circuits or overheating, and result in fire, electric shock, or malfunction of the
projector.
f
Do not place containers of liquid or metal objects near the projector.
f
If liquid enters inside of the projector, consult your dealer.
f
Particular attention must be paid to children.
Installation work such as mounting the projector on the ceiling should only be carried out by a qualified
technician.
If installation is not carried out and secured correctly, it can cause injury or accidents, such as electric shocks.
r
ACCESSORIES
Do not use or handle the batteries improperly, and refer to the following.
Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire.
f
Do not use unspecified batteries.
f
Do not charge dry cell batteries.
f
Do not disassemble dry cell batteries.
f
Do not heat the batteries or place them into water or fire.
f
Do not allow the + and – terminals of the batteries to come into contact with metallic objects such as
necklaces or hairpins.
f
Do not store or carry batteries together with metallic objects.
f
Store the batteries in a plastic bag and keep them away from metallic objects.
f
Make sure the polarities (+ and –) are correct when inserting the batteries.
f
Do not use a new battery together with an old battery or mix different types of batteries.
f
Do not use batteries with the outer cover peeling away or removed.
If the battery fluid leaks, do not touch it with bare hands, and take the following measures if necessary.
f
Battery fluid on your skin or clothing could result in skin inflammation or injury.
Rinse with clean water and seek medical advice immediately.
f
Battery fluid coming in contact with your eyes could result in loss of sight.
In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.
Do not allow children to reach the lens fixing screw, the lens hood screws, and the knurled head
screws.
Accidentally swallowing them can cause physical harm.
f
If swallowed, seek medical advice immediately.
Remove the depleted batteries from the remote control promptly.
f
Leaving them in the unit may result in fluid leakage, overheating, or explosion of the batteries.
