Chapter 4
Settings — [PROJECTOR SETUP] menu
146 - ENGLISH
f
It will return to previous screen by selecting [BACK] and pressing the <ENTER> button.
18) Wait until [Waiting time] turns [0s].
f
Wait until the focus is stabilized.
f
When the [Waiting time] turns [0s], the [Please wait...] message disappears, and [NEXT] becomes
selectable.
19) Press
qw
to select [NEXT], and press the <ENTER> button.
f
The
[SETUP ASSISTANT]
screen (page 5/8) is displayed.
f
It will return to previous screen by selecting [BACK] and pressing the <ENTER> button.
20) Press
asqw
to select [FOCUS POSITION].
21) Press
qw
to adjust the focus.
22) Press
asqw
to select [NEXT], and press the <ENTER> button.
f
The
[SETUP ASSISTANT]
screen (page 6/8) is displayed.
23) Press
asqw
to select [TEST PATTERN].
24) Press
qw
to select [INTERNAL].
f
The items will switch each time you press the button.
[INTERNAL]
Uses the internal focus test pattern of signal level approximately 0 % for focus adjustment.
[EXTERNAL]
Select this item when using the input image from an external device for focus adjustment.
25) Press
asqw
to select [NEXT], and press the <ENTER> button.
f
The
[SETUP ASSISTANT]
screen (page 7/8) is displayed.
f
It will return to previous screen by selecting [BACK] and pressing the <ENTER> button.
26) Wait until [Waiting time] turns [0s].
f
Wait until the focus is stabilized.
f
When the [Waiting time] turns [0s], the [Please wait...] message disappears, and [NEXT] becomes
selectable.
27) Press
qw
to select [NEXT], and press the <ENTER> button.
f
The
[SETUP ASSISTANT]
screen (page 8/8) is displayed.
f
It will return to previous screen by selecting [BACK] and pressing the <ENTER> button.
28) Press
asqw
to select [FOCUS POSITION].
29) Press
qw
to adjust the focus.
30) Press
asqw
to select [STORE], and press the <ENTER> button.
f
[SETUP ASSISTANT] is completed, and the parameters for [FOCUS OFFSET BRIGHT] and [FOCUS
OFFSET DARK] are updated.
Note
f
When the parameters for [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] are set by executing [SETUP ASSISTANT], the
[PROJECTOR SETUP] menu
→
[LENS]
→
[ACTIVE FOCUS OPTIMIZER]
→
[ACTIVE FOCUS] will be set to [ON].
f
When [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] are set following the guidance of [SETUP ASSISTANT] with AC 100 V
to AC 120 V, use the projector with AC 100 V to AC 120 V. When the power supply is changed to AC 200 V to AC 240 V, reset the settings
using [SETUP ASSISTANT].
Performing simplified setting using the external input image
Input any focus adjustment still image from the external device connected to the projector, and set the parameters
for [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] following the guidance of [SETUP ASSISTANT].
1) Switch to the input to display the focus adjustment image.
2) Press
as
to select [LENS].
3) Press the <ENTER> button.
f
The
[LENS]
screen is displayed.
