Chapter 1
Preparation — About your projector
ENGLISH - 31
17 Luminance sensor (
x
page 87)
18 Control panel (
x
page 31)
19 Top slide cover
There is the wireless module connection terminal inside.
(
x
page 50)
20 Burglar hook port
Attaches a burglar prevention cable, etc.
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
The components may deteriorate faster if cooling inside the projector is inhibited.
r
Control panel
6
3
7
8
1
3
4
5
2
1 Power <
v
/
b
> button
(
v
: Standby,
b
: Power on)
Sets the projector to the state where the projector is turned
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
Sets the projector to projection mode when the power is
switched off (standby mode).
2 <MENU> button
Displays or hides the main menu. (
x
page 79)
Returns to the previous menu when a sub-menu is displayed.
3 <VOL-> button/<VOL+> button
Adjusts the volume of the built-in speaker and the audio output.
(
x
page 72)
4 <SHUTTER> button
Used to turn off the image and audio temporarily. (
x
page 71)
5 <ENTER> button
Determines and executes an item in the menu screen.
6 <INPUT SELECT> button
Switches the input signal to project. (
x
page 66)
7 <LENS/CANCEL> button
Adjusts the focus, zoom, and lens shift of the lens.
(
x
page 67)
Also used for cancel operation during digital zoom and
operation in theMemory Viewer screen, or while the standby
screen for MIRRORING input or Panasonic APPLICATION input
is displayed.
8
asqw
buttons
Selects an item in the menu screen, changes the setting, and
adjusts the level.
Also used to enter a password in the [SECURITY] menu or
enter characters.