Chapter 4
Settings — [SECURITY] menu
136 - ENGLISH
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Hides the security message.
[TEXT]
Displays the text set in the [SECURITY] menu
→
[TEXT CHANGE].
[USER LOGO]
Displays the image registered by the user.
Note
f
To create and register the [USER LOGO] image, use “Logo Transfer Software”. The software can be downloaded from the Panasonic
website (https://panasonic.net/cns/projector/).
[TEXT CHANGE]
Edit the text to be displayed when [TEXT] is selected in [DISPLAY SETTING].
1) Press
as
to select [TEXT CHANGE].
2) Press the <ENTER> button.
f
The
[TEXT CHANGE]
screen is displayed.
3) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
4) Press
asqw
to select [OK], and press the <ENTER> button.
f
The text is changed.
[MENU LOCK]
Press the <MENU> button to display the menu, and set if menu operation is enabled or not.
1) Press
as
to select [MENU LOCK].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Enables the menu operation.
[ON]
Disables the menu operation.
Note
f
This function is set to [OFF] as the factory default setting or after the [PROJECTOR SETUP] menu
→
[INITIALIZE] is executed. Set it to
[ON] as necessary.
f
When [MENU LOCK] is set to [ON], the
[MENU LOCK PASSWORD]
screen is displayed by pressing the <MENU> button. Menu operation
is enabled by entering the set menu lock password. In this case, enabling of the menu operation is maintained until the projector goes into
the standby mode.
[MENU LOCK PASSWORD]
Change the menu lock password.
1) Press
as
to select [MENU LOCK PASSWORD].
2) Press the <ENTER> button.
f
The
[MENU LOCK PASSWORD]
screen is displayed.
3) Press
asqw
to select the character, and press the <ENTER> button to enter the character.
f
Up to 16 characters can be entered.
4) Press
asqw
to select [OK], and press the <ENTER> button.
f
To cancel, select [CANCEL].
Attention
f
The initial password is AAAA as the factory default or after the [PROJECTOR SETUP] menu
→
[INITIALIZE] is executed.
f
Change the password periodically and make it hard to guess.
