E
NGLISH
-89
Settings of wireless card
q
q
Click the icon on the task bar and,
from "Menu", open "Advanced
Settings".
w
w
Enter the name in "Profile Name" to
preserve the settings.
The initial value is set to Default .
Only alphanumeric characters and symbols are
acceptable.
e
e
If the Communication mode is set to
"Infrastructure" (Access Point):
Set Network name (SSID) to the same setting as
the projector.
If the Communication mode is set to
"AdHoc" (Pseudo AdHoc):
Set the channel to the same number as the
projector.
r
r
If WEP (encryption) has been set in
the projector:
Select the "WEP mode", and set it to the same
settings as the projector and the access point.
64 (40) bit encryption
To enter an encryption key:
Characters: 5 characters
Hexadecimal numbers: 10 digits
Select a default key number from 1 to 4.
128 (104) bit encryption
To enter an encryption key:
Characters: 13 characters
Hexadecimal numbers: 26 digits
Select a default key number from 1 to 4.
t
t
Click the Apply button.
Click the OK button to close the window.
