Panasonic PT-L730NTE Operating Instructions Manual Download | Manualshive

Page: 108 / 118

background image

108-E

NGLISH

7. "Convert and save" button

Files will be converted into the specified format (automatic, JPEG or PNG
conversion) and size, and saved into the destination selected in (6).

8. "Launch Wireless Manager" button

Wireless Manager 2.0 will be started.
(Once it is started, it will be minimized on the task bar. To operate the function,
right-clicking the icon with the mouse.)
If the images have been stored using Image Creator 1.0 in advance, an image list
window appears after the start of Wireless Manager 2.0, followed by the
thumbnail display of images stored using Image Creator 1.0.

9. Thumbnail display

The images captured into Image Creator 1.0 are displayed in reduced size. They
can be sorted or deleted by right clicking with the mouse.

10."Exit" button

Quits Image Creator 1.0.

11."Close" button

Quits Image Creator 1.0.

Converting and saving captured images

When you press the "Convert and save" button on
the Image Creator main screen, a setting window
will appear as shown in the diagram on the right.

1. "Slide" button

This button switches the display of image
files captured into Image Creator.

2. "Compression format" setting

Specify the compression format in which the files
are saved (AUTO, JPEG and PNG are available).
If AUTO is selected, the file is automatically
converted into either JPEG or PNG format.

Note:

• If the file would be more compact in PNG format, this format will be selected for saving.

3. "Convert and screen size" setting

Specify the screen size of the file to be saved.

4. "Current image" button

Currently selected image file will be saved in the specified compression format
and screen size onto the SD card or into other folders. The name of the saved file
will be generated automatically.

5. "All image" button

All image files captured into Image Creator are saved in the specified
compression format and screen size onto the SD card or into other folders. The
name of the saved file will be generated automatically.

6. Slide display

The currently selected image file will be displayed.

7. "Stop/Exit" button

This button stops converting and saving process and closes the screen. If you
press this button when converting or saving is in progress, the remaining process
will be stopped and the screen will be closed.

8. "Close" button

This button stops converting and saving process and closes the screen. If you
press this button when converting or saving is in progress, the remaining process
will be stopped and the screen will be closed.

2

3

4

5

1

8

6

7

«
...
106
107
108
109
110
...
»

Summary of Contents for PT-L730NTE























































































































Reviews:

No comments

Related manuals for PT-L730NTE

Brand: Acer Pages: 68

Brand: Christie Pages: 57

Brand: Emos Pages: 4

Brand: Barco Pages: 54

Brand: Wize Pages: 12

Brand: GRASS Pages: 28

Brand: Hitachi Pages: 60

Brand: Hitachi Pages: 66

Brand: Hitachi Pages: 242

Brand: Hitachi Pages: 3

Mi Smart Projector 2

Brand: Xiaomi Pages: 13

EKTAPRO 9020 CINE

Brand: Kodak Pages: 2

Brand: Acer Pages: 45

Brand: Toshiba Pages: 2

Brand: Toshiba Pages: 1

Brand: Toshiba Pages: 37

Brand: Rompa Pages: 4

Brand: Sony Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands