Panasonic PT-L730NTE Operating Instructions Manual Download

Page: 76 / 118

76-E

NGLISH

Removing SD card

Take out the SD card in the following procedure:

Quit all software applications that use the SD card.

Left-click the PC card icon (

) shown on the task bar at the

right bottom on the screen.

Note:

• If no PC card icon is appearing on the task bar at the right bottom of the screen, go

to Start menu

→

Setting

→

Control panel, open "PC card", click the "Show control

on the task bar" check box, and then click the "OK" button.

Select either "Disable standard
IDE/ESDI hard disk controller" or
"Disable BN-SD Series PCMCIA Disk
Controller" and click it.

When a screen appears, as shown on
the right, click "OK" and take out the
PC card adaptor.

Press the ejector button of the PC card
adaptor and pull out the SD card.

Note:

• Strictly follow the procedure for card removal.

Removing the card in a wrong procedure may
destroy the card or stored data.

Ejector button

Summary of Contents for PT-L730NTE























































































































Search results

Summary of Contents for PT-L730NTE

Reviews:

Related manuals for PT-L730NTE

Brands by name

Popular brands

Panasonic PT-L730NTE, Operating Instructions Manual

Search results

Summary of Contents for PT-L730NTE

Reviews:

Related manuals for PT-L730NTE

Brands by name

Popular brands