E
NGLISH
-15
Preparation
Remote control unit
q
Power indicator
(pages
27
,
28
and
45
)
This indicator illuminates red when
the MAIN POWER switch is turned
on (standby mode), and illuminates
green when the power is turned on
and a picture starts to be projected.
When the WEB STANDBY is set
to "ON", the cooling fan operates
and the power indicator on the
projector flashes slowly in red.
w
RGB INPUT indicator
(page
55
)
This indicator shows whether a
signal is being input to the RGB
input connectors (RGB 1 IN/RGB
2 IN). When an input signal is
detected, the indicator illuminates.
e
LAMP indicator
(page
50
)
This indicator illuminates when it is
time to replace the lamp unit. It flashes
if a circuit abnormality is detected.
r
Input select (INPUT, RGB,
VIDEO) buttons
(page
27
)
t
TEMP indicator
(page
49
)
This indicator illuminates if an
abnormally high temperature is
detected inside the projector or
around it. If the temperature rises
above a certain level, the power
supply will be turned off
automatically and the indicator
will illuminate or flash.
y
POWER button
(pages
27
and
28
)
u
AUTO SETUP button
(pages
27
and
55
)
If this button is pressed while a
picture is being projected, the
projection settings will be adjusted
automatically in accordance with
the signal being input. In addition,
the angle of tilt of the projector will
be automatically detected and
adjusted in order to correct any
keystone distortion. (“AUTO
SETUP” will appear on the screen
during adjustment.) Set “AUTO
KEYSTONE” in the OPTION
SHUTTER
POWER
AUTO SETUP INPUT
TEMP
LAMP
RGB INPUT
ENTER
MENU
ON(G)
STANDBY(R)
POWER
RGB
VIDEO
R-CLICK
LASER
MENU
PAGE
ENTER
FREEZE SHUTTER
FUNC1
Computer
Pro jector
STD
SETUP
AUTO
y
r
u
!6
!7
o
!5
!0
!1
!8
i
@4
!9
@0
@1
@3
!2
y
!3
!4
u
t
r
e
w
o
!0
!1
i
q
Projector control panel
