Panasonic PT-L730NTE Operating Instructions Manual Download

Page: 96 / 118

96-E

NGLISH

Projector control

Click "Projector control" in the menu.

The user can make various settings of the projector.

Basic control screen

Notes:

• When the power is turned ON, the

window is closed for the moment. Then,
confirming that the light is turned on, start
operation again from the top screen.

• Connection with the projector cannot be

established just after turning on the
power. In this case, wait for a while and
try connection again.

• If Web control is not turned ON in the

option setting of the projector, neither basic
control nor option control will operate.

• Web power is not turned ON in the

option setting of the projector, it will not
be powered on. However, the projector
control screen will display still the same
content as shown when the projector
operates normally.

Option control screen

Note:

• If the projector does not work as

controlled, ensure that the Web control
is set to ON in the Option menu.

Monitor information screen

Note:

• Monitor information is updated at

regular intervals. If you go to "Display"
and press the "Refresh" button, you can
check the current and accurate
information.

Summary of Contents for PT-L730NTE























































































































Search results

Summary of Contents for PT-L730NTE

Reviews:

Related manuals for PT-L730NTE

Brands by name

Popular brands

Panasonic PT-L730NTE, Operating Instructions Manual

Search results

Summary of Contents for PT-L730NTE

Reviews:

Related manuals for PT-L730NTE

Brands by name

Popular brands