Panasonic PT-L730NTE Operating Instructions Manual Download

Page: 73 / 118

NGLISH

-73

Replay

Change to "SD card" using the input
switching (INPUT, RGB) button of the
projector or remote controller.

Select the folder with the

and

buttons and press the

ENTER button.

A file selection screen will appear.

Notes:

• If three or more folders are found, press the

button and the next three (or less)

folders will be shown in turn.

• If no thumbnail has been incorporated in the

image file in advance, it will take a longer
time before image appears.

• A folder that contains no image file cannot

be selected.

• To return to the folder selection screen,

press the MENU button.

Select the file with the

buttons and press

the ENTER button.

The selected image will be displayed in full
screen mode.
If "OFF" has been selected for auto play,
the

and

buttons can select the

previous or next image for display.

Notes:

• If ten or more files are found, press the

button when the bottom row files are

highlighted, or press the

button when the right bottom file is highlighted. This

will show another nine (or less) files in turn.

• To return to the file selection screen, press the MENU button.
• If "ON" has been selected for auto play, the image will be displayed in full screen

mode and automatic replay will start.

SD CARD

Summary of Contents for PT-L730NTE























































































































Search results

Summary of Contents for PT-L730NTE

Reviews:

Related manuals for PT-L730NTE

Brands by name

Popular brands

Panasonic PT-L730NTE, Operating Instructions Manual

Search results

Summary of Contents for PT-L730NTE

Reviews:

Related manuals for PT-L730NTE

Brands by name

Popular brands