Chapter 4
Settings — [SETUP] menu
ENGLISH - 67
1) Press
as
to select [DIRECT PLAY SETTING].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[MEMORY VIEWER]
Enables the direct play function of MEMORY VIEWER.
[Content Manager]
Enables the multiple direct play function.
For details, please refer to "Basic operation procedure of multiple direct play" and "Operation method
of multiple direct play" in the "Operating Instructions - Content Manager Manual".
[ECO MANAGEMENT]
This function optimizes power according to the operating status to reduce power consumption.
Setting [LIGHT POWER]
1) Press
as
to select [ECO MANAGEMENT].
2) Press the <ENTER> button.
f
The
[ECO MANAGEMENT]
screen is displayed.
3) Press
as
to select [LIGHT POWER].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[NORMAL]
Select this item when high luminance is required.
[ECO]
Select this item when high luminance is not required.
Note
f
When [ECO] is set, the power consumption can be saved and operation sound can be reduced compared to when [NORMAL] is set.
f
When [ECO] is set, the images may appear different from that when [NORMAL] is set.
Setting [AV MUTE DETECTION]
This function can be used to turn off the light source and lower power consumption while AV mute is in use.
1) Press
as
to select [ECO MANAGEMENT].
2) Press the <ENTER> button.
f
The
[ECO MANAGEMENT]
screen is displayed.
3) Press
as
to select [AV MUTE DETECTION].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ON]
The light source is turned off during the AV mute mode.
When AV mute is cancelled, the audio resumes and the light source is turned on again.
[OFF]
The light source remains on during the AV mute mode.
Note
f
While AV mute is cancelled, it may take some time when setting [AV MUTE DETECTION] to [ON] before the image is displayed again.
Setting [NO SIGNAL SHUT-OFF]
This function automatically switches the power of the projector to standby if the input is HDMI, MIRRORING, or
Panasonic APPLICATION and there is no input signal for a certain period of time. The time before switching to
standby can be set.
1) Press
as
to select [ECO MANAGEMENT].
2) Press the <ENTER> button.
f
The
[ECO MANAGEMENT]
screen is displayed.
3) Press
as
to select [NO SIGNAL SHUT-OFF].
