Panasonic PT-JX200FBE Operating Instructions (Functional Manual) Download

Page: 128 / 144

Chapter 6

Maintenance — Inspection and maintenance

128 - ENGLISH

Inspection and maintenance

Before maintaining the projector

Attention

Make sure to turn off the power before maintaining the projector. (

page 43)

When switching off the projector, make sure to follow the procedures in “Turning off the projector” (

page 43).

WARNING

Be sure to disconnect the power from the projector before maintaining the projector.

Electric shocks can result.

Maintenance

Outer case

Wipe off dirt and dust with a soft, dry cloth.

If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry off the projector with

a dry cloth.

Do not use benzene, thinner, or rubbing alcohol, other solvents, or household cleaners. Doing so may

deteriorate the outer case.

When using chemically treated dust cloths, follow the instructions written on its packaging.

Projection lens

Wipe off dirt and dust from the front surface of the lens with a soft clean cloth.

Do not use a cloth that is fluffy, dusty, or soaked with oil/water.

Since the lens is fragile, do not use excessive force when wiping the lens.

Attention

The lens is made of glass. Hitting with a hard object or excessive force when wiping may scratch its surface. Handle with care.

Cleaning inside the projector

In certain environments, such as in dusty locations, dust accumulated around the intake and exhaust ports may

degrade ventilation, cooling, and heat venting, and brightness may decrease as a result.
If brightness is noticeably reduced and the light source does not turn on, ask your dealer to clean inside the

projector or replace the light source unit.

Inspection

Ask your dealer for inspection by an expert at least once every three years.

If the projector is used for prolonged periods without inspection, it may catch fire, cause an electric shock, or fall.

For information about inspection costs, consult your dealer.

Attention

Do not leave the product in place after use. Put it away immediately to prevent it falling in the event of an earthquake, etc.

Summary of Contents for PT-JX200FBE

















































































































































Search results

Summary of Contents for PT-JX200FBE

Reviews:

Related manuals for PT-JX200FBE

Brands by name

Popular brands

Panasonic PT-JX200FBE, Operating Instructions (Functional Manual)

Search results

Summary of Contents for PT-JX200FBE

Reviews:

Related manuals for PT-JX200FBE

Brands by name

Popular brands