Panasonic PT-DZ13KU, Service Manual, Page: 72 / 121

ADJ - 6
1. 4. 4. Restore the backup EEPROM Data (After circuit board exchange)
1. Switch the projector to "Normal-Standby" mode (POWER indicator is Lighting in red).
2. Start up service software
［
DataLogBackup.exe
］
with a computer.
3. Select "Option "
⇒
" Setting" and set Serial Port of the computer, Baud Rate and Parity.
4. Select a model number and ID.
5. 1) Choose "Backup" (an EEPROM).
2) Checkmark in "REPLACE A-PWB" of "COPY MODE".
3) Click an [WRITE EEPROM] button.
6. Select the file and click the [OPEN(O)] button.
7. When the progress bar reaches the right-side end, the write of data is completion.
Select "File"
⇒
"Quit", please exit.
8. When to turn off the main power and turned on again, the setting is complete.