Panasonic PT-DZ13KU, Service Manual, Page: 57 / 121

DIS-10
4. Unscrew the 4 screws and remove the Analysis Case (Top).
・
Unscrew the 2 screws and remove the Iris Unit (Assy).
・
Unscrew the 2 hexagon socket head screw and remove
the Relay Lens holder.
・
Take off a Lens fixed spring (two places) and remove a Relay Lens.
* Attention when assemble the Analysis Case (Top).
Careful so that the spring of the Relay Lens holder fits into the prescribed position properly.
XYN3+F8FJ
* Analysis case assembling needs the
confirmation of the lighting area afterward.
Please refer to the SECTION3 adjustments.
Analysis Case (Top)
XYN4+J8FJ
50
±
5cN
・
m
XVE3A10FT
Relay Lens holder Iris Unit (Assy)
2.5mm Hex driver)
Push here, and remove a
Lens fixed spring to upside.
Relay Lens 4
Relay Lens 3
Lens fixed spring
Relay Lens holder
Analysis Case (bottom)
Lens fixed spring
The position where a spring
sticking to a Relay Lens
holder fits into.
Lens fixed spring