Panasonic PT-DZ13KU, Service Manual, Page: 70 / 121

ADJ - 4
1. 4. EEPROM data transfer
1. 4. 1. Equipment to be used
1. Computer : Use it for the transfer of backup data.
2. Communication cable : D-sub 9pin (male/female RS-232C straight)
3. Service Software :
［
DataLogBackup.exe
］
Service software is downloaded from the projector service homepage.
1. 4. 2. Connection preparations
Attention : Computer, please set so as not to standby or shutdown.
1. 4. 3. Backup the EEPROM data (It is before circuit board exchange)
1. Switch the projector to "Normal-Standby" mode (POWER indicator is Lighting in red).
2. Start up service software
［
DataLogBackup.exe
］
with a computer.
3. Select "Option "
⇒
" Setting" and set Serial Port of the computer, Baud Rate and Parity.
4. Select a model number and ID.
1. Confirm the projector's ID, baudrate, prity and
take a memo.
2. Connect the serial terminals on the projector
and the PC by using a communication cable.