Panasonic PT-DZ13KU, Service Manual, Page: 22 / 121

4. External Controls
4. 1. Control through Serial terminal
4. 1. 1. Connection
●
Single projector
●
Multiple projectors
4. 1. 2. Pin assignments and signal names
4. 1. 3. Communication conditions
4. 1. 4. Communication condition setting
1. Press MENU button of main body or remote controller.
Go to Main menu --> Projector setup. In sub menu,
select "RS-232C" and press ENTER.
2. Select communication condition by pressing
▲ ▼
button.
Set it with pressing
 
button.
3. Press MENU button 3 times and return to regular display.
4. 1. 5. Cable specification
・
When connected to a computer
・
When multiple projectors are connected
SERIAL terminals which are on the side of the projector conform to RS-232C standard. This projector can be controlled
by a PC which is connected as shown below. Also SERIAL OUT terminal is provided to enable plural projector control.