Panasonic PT-DZ13KU, Service Manual, Page: 56 / 121

DIS-9
6. Unscrew the 4 screws, and divide Analysis Block and Synthetic Block.
・
Unscrew the 3 screws and remove the each synthetic Mirror.
2. 7. Removal of Rod (Assy)/Iris Unit (Assy)/Relay Lens
1. Remove the Intake Duct (Assy) and ACF(Assy) according to the section 2.4. "Removal of Intake Duct (Assy) / ACF(Assy)".
2. Remove the RL-Board bracket according to the steps 1 through 3 in the section 2.6. "Removal of Analysis Block /
Synthesis Block / Synthetic Mirror".
3. Unscrew the 2 screws and
remove the Rod cover.
・
Unscrew the 3 screws and remove the Rod (Assy).
XYN4+J12FJ
Synthetic Block (lamp case side)
XYN3+F8FN
XYN3+F8FN
Lamp Fan
Lamp Fan
Synthetic Mirror
XYN3+F8FJ
Rod cover
* Please pull straight it up not to injure a
rod integrator.
XYN3+F10FN
Rod (Assy)
* Please be careful so that a fingerprint
and dust do not stick.