Panasonic PT-DZ13KU, Service Manual, Page: 52 / 121

DIS-5
2. 2. Removal of Lamp Unit
1. Loosen the 1 screw until it idles, then remove the Rear cover (Assy).
2. Loosen the 2 screws until they idle, hold the handles and pull the lamp unit out from the main unit.
2. 3. Removal of Upper Case (R/RM/RL/M2/F/R2 -P.C.Board)
1. Remove the projection lens. (* Move the lens to the home position before removing the projection lens.)
1) Remove the “Lens fixing screw”. (* Some types of the lens do not have the projection lens fixing screw hole.)
2) While holding down the “LOCK button”, turn the projection lens counterclockwise, and then pull it off.
2. Loosen the 1 screw until it idles, then remove the Rear cover (Assy).
Rear cover (Assy)
Lamp unit 1 Lamp unit 2
Lens fixing screw
Remove the first screw on the right side of the
mark (orange) of the projection lens with a
Phillips-head screwdriver.
Turn the projection lens counterclockwise until
its mark (orange) is aligned with the mark on
the projector ( on the left side of LOCK).