Panasonic PT-DZ13KU, Service Manual, Page: 69 / 121

ADJ - 3
1. 2. Electrical Convergence Adjustment
It is a function to correct a convergence by a pixel unit every R/G/B ingredient.
・
When adjust the DZ/DS models, because it uses the entire pixel of DMD, the edge pixel of the projection
screen is missing.
1. Projected cross-hatch pattern, confirm a position gap of R/G/B.
2. Setting to service mode, and select sub menu "CONVERGENCE" of main menu "EXTRA OPTION".
3. Select a color to be adjusted.
4. Press "
▲
" "
▼
" button to adjust the vertical direction, press "
◀
" "
▶
" button to adjust the horizontal direction.
5. After adjustment completion, resetting to user mode.
1. 3. Lens calibration
1. Select sub menu "LENS CALIBRATION" of main menu "PROJECTOR SETUP".
2. Because a confirmation message is displayed, select "OK".
3. The lens will move vertically and horizontally, and the limit value of the lens shift and home position are set automatically.
4. When the lens has been completely stopped, calibration is complete.
・
If the calibration has not been correctly executed, a message [INCOMPLETE] will appear.
In this case, please start again from 1.
Note
* Default : 0
* Variable range of adjustment
[DW11K]
V : -64
～
64, H : -16
～
16
[DZ13K/DS12K/DZ10K]
V : -64
～
0, H : 0
～
16