Panasonic PT-DS100XE ( ) Operating Instructions Manual Download

Page: 90 / 130

SIGNAL LIST menu

- ENGLISH

Settings

See “Navigating through the menu”

(

page 50).

See “MAIN MENU” and “SUB MENU”

(

page 51).

REGISTERED SIGNAL STATUS

The name can be set for each sub memory.

MEMORY NO. : A1 (1-2)

Registering a signal to the list

When a new format input signal is applied to the

projector, press <MENU> button to register to the

SIGNAL LIST.

Note

You can register data up to 96 in total number of the

signal data and any corresponding sub memory data.

The memories are numbered over 12 pages (A to L: 8

data items can be registered on each page), and the

data is registered in the unused memory with the lowest

number. If all the memories are used, the data of the old

signals is overwritten in sequence.

The names of the registered data are automatically

determined by the input signals and memory numbers.

If a menu is being displayed, the new signals will be

registered at the instant they are input.

Renaming a registered data

Press ▲▼◄► to select the required

1 )

signal data.
Press <ENTER> button.

2 )

The [REGISTERED SIGNAL STATUS] screen

will be displayed.

Displays the character list.

Press <MENU> button to return to the

[REGISTERED SIGNAL LIST] screen.

Press <ENTER> button.

3 )

The [RENAME] screen will be displayed.

Press ▲▼◄► to select characters

4 )

and press <ENTER> button to input

them.
Press ▲▼◄► to select [OK], and

5 )

press <ENTER> button.

The [REGISTERED SIGNAL LIST] screen will

be displayed.

Press ▲▼◄► to select [CANCEL] and press

<ENTER> button to return to the [REGISTERED

SIGNAL LIST] without any change.

Deleting a registered data

Press ▲▼◄► to select the required

1 )

signal data.
Press <DEFAULT> button.

2 )

The [ENTRY SIGNAL CLEAR] screen will be

displayed.

Press <MENU> button to cancel and return to

the [REGISTERED SIGNAL LIST] without any

change.

Press <ENTER> button.

3 )

Displays [REGISTERED SIGNAL LIST] and

confirm the data is deleted.

Sub memory number

When the address number (A1, A2, …H7,

H8) signal is registered

SIGNAL LIST menu

Summary of Contents for PT-DS100XE ( )


































































































































Search results

Summary of Contents for PT-DS100XE ( )

Reviews:

Related manuals for PT-DS100XE ( )

Brands by name

Popular brands

Panasonic PT-DS100XE ( ), Operating Instructions Manual

Search results

Summary of Contents for PT-DS100XE ( )

Reviews:

Related manuals for PT-DS100XE ( )

Brands by name

Popular brands