NETWORK menu
ENGLISH -
95
Settings
NETWORK menu
See “Navigating through the menu”
z
See “MAIN MENU” and “SUB MENU”
z
NETWORK SETUP
Make the initial network settings before using the
network connection.
Press ▲▼ to select [NETWORK
1 )
SETUP].
Press <ENTER> button.
2 )
The [NETWORK SETUP] screen will be
z
displayed.
Press ▲▼ to select an item, and
3 )
change the setting according to the
instructions.
PROJECTOR
NAME
(Display of host
name and setting)
Change as needed when using
a DHCP server.
DHCP
(DHCP client
function)
Set [DHCP] item to [ON] when
to acquire an IP address
automatically using the DHCP
server.
Set to [OFF] if [DHCP] server is
not used. Enter the IP address if
DHCP server is not used.
IP ADDRESS
(Display of IP
address and
setting)
Enter the IP address if DHCP
server is not used.
SUBNET MASK
(Displaying
and setting the
subnet mask)
If not using a DHCP server, enter
the subnet mask.
DEFAULT
GATEWAY
(Display of gateway
address and
setting)
Enter the gateway address if
DHCP server is not used.
STORE
Save the current network
settings.
Press ▲▼ to select [STORE], and
4 )
press <ENTER> button.
Note
Before using the DHCP server, make sure the DHCP
z
server is already functioning.
For details of IP address, subnet mask, and gateway, ask
z
the network administrator.
NETWORK CONTROL
This sets the network control method.
Press ▲▼ to select [NETWORK
1 )
CONTROL].
Press <ENTER> button.
2 )
The [NETWORK CONTROL] screen will be
z
displayed.
Press ▲▼ to select items, and press
3 )
◄► to change the setting.
WEB
CONTROL
Set this to [ON] when you want
to perform control with the Web
browser.
PJLink
CONTROL
Set this to [ON] when you want
to perform control with the PJLink
protocol.
COMMAND
CONTROL
Û
Set to [ON] to control using the
control command via the serial
terminal. (
COMMAND
PORT
Set the port number used for the
command control.
STORE
Save the current network control
settings.
If settings have been made without an
:
Û
administrator password of the Web browser
control, add 2-byte “00” instead of STX, and a line-
feed code (0Dh) instead of ETX. If settings have
been made with an administrator password of the
Web browser control, add a 32-byte hash value
and “00” instead of STX and a line-feed code (0Dh)
instead of ETX. The hash value is created by MD5
combining “admin1:”, password, “:” and random
numbers. The random numbers are 8-byte values
sent from the projector when connecting.
NETWORK STATUS
This displays the network status of the main unit.
Press ▲▼ to select [NETWORK
1 )
STATUS].
Press <ENTER> button.
2 )
The [NETWORK STATUS] screen will be
z
displayed.
Summary of Contents for PT-DS100XE ( )
Page 130: ......
