Panasonic Panafax UF-585, Service Manual

Page: 263 / 310

263
34 ENERGY SAVER MODE
1 Off
To reduce the power consumption in standby, select either Energy-
Saver or Sleep mode and specify the Delay Time (1 to 120
minutes) for the machine to enter into the selected mode.
The Delay Timer setting is only available in the Energy-Saver or
Sleep Modes.
Off :
The unit will remain in standby mode and
consume more energy than when in Energy-
Saver or Sleep modes.
Energy-Saver Mode :Saves energy by consuming less power than
when in standby mode by turning off the
fuser unit after the specified time.
Sleep Mode : This is the lowest power state that the
machine enters after the specified time
without actually turning off.
2 Energy-Saver
3 Sleep
35 DAYLIGHT TIME
1 Invalid
Selecting whether the clock adjusts for Daylight Saving Time
automatically. The built-in clock will advance 1 hour at 2:00 am on
the first Sunday in April and fallback 1 hour at 2:00 am on the last
Sunday in October.
2 Valid
37 RCV TO MEMORY
(----)
Enter a 4-digit password used to print out the received document
in memory by using F8-5 (RCV TO MEMORY). When F8-5 is set
to On, this parameter will not be shown on the LCD display.
38 ACCESS CODE
(----)
Enter a 4-digit Access Code to secure the machine from
unauthorized use.
40 RELAY XMT REQUEST 1 Invalid Selecting whether the machine accepts and performs Relay XMT
Request.
2 Valid
42 CONF. POLLED FILE
SAVE
1 Invalid Selecting whether the machine saves the confidential polled file
even after the file is polled once.
2 Valid
43 PASSWORD-XMT 1 Off Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the receiving
station when transmitting.
2 On
44 PASSWORD-RCV
1 Off
Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
transmitting station when receiving.
2 On
46 SELECT RCV 1 Invalid Selecting whether the machine performs selective reception.
2 Valid
47 REMOTE RECEPTION 1 Invalid Selecting whether or not the machine accepts remote reception
command.
2 Valid
48 TELEPHONE LINE 1 PSTN Selecting the type of line connected.
2 PBX
49 PSTN ACCESS CODE 0--- Setting PSTN Access Code. (max. 4 digits)
50 FLASH KEY 1 Earth Selecting to use FLASH on control panel either as Earth key or
Flash key.
2 Flash
52 DIAGNOSTIC
PASSWORD
(----)
Setting the password for Remote Diagnostic Mode. Please ask
your Panasonic Authorized Dealer for details.
53 SUB-ADDRESS
PASSWORD
(----)
Setting a 20-digit password for secured sub-address
communication.
Continued on the next page.
No. Parameter
Setting
Number
Setting Comments