Panasonic Panafax UF-585, Service Manual

Page: 7 / 310

7
26. Receive to Memory
Users can set the unit to store incoming documents into its available memory. Later, using a 4-digit password, stored
documents can be printed when the user is present. This function helps ensure that important documents are not read or lost
while they are sitting unattended in the fax tray.
27. Relay Transmission Request
By setting the machine as an initial sending station, the unit is capable of setting up a relay request to a central hub machine
with a network password. Documents can then be automatically transmitted to the end receiving stations. This model is
designed to operate as an initial sending station.
28. Confidential Mailbox
When the received message is stored into the memory with a 4-digit confidential code, the message can be printed on
recording paper or polled by a remote station. A maximum of 10 mailboxes can be used. A remote confirmation report such as
Confidential Memory Report and/or Confidential XMT Report is not transmitted to the source station and/or the remote station
after Confidential Mailbox reception or polling transmission.
29. Remote Diagnostic Function
The remote Diagnostic Function can be used to diagnose the unit remotely over the PSTN or equivalent. A new host system
is required for high speed remote diagnostics to be available.
30. Check and Call Function
This feature enables the Authorized Servicing Dealers to manage and improve the Fax machine maintenance to their
customers by alerting them of equipment problems. It also can be used as a Supply Sales Tool by alerting the Dealer that the
unit is running Low on Toner. The function overview is as follows:
a. The machine’s printer error information is stored in the Printer Report.
b. The printer report can be manually printed when required.
c. When printer errors occur, the unit can automatically transmit the Service Alert Report to the pre-registered telephone
number.
d. When the unit detects Low Toner, it can automatically transmit the Maintenance Alert Report to the pre-registered
telephone number.
e. When the unit detects Low Toner, it can automatically print out the Toner Order Form with pre-registered order information.
31. Continuous Polling (Station Mode)
This feature allows you to store or add documents into a polled file in memory.
To enable the Continuous Polling feature set Function Parameter No. 003 to "2:Station". The Program Key [P4] will be
assigned with the "Store-4-Polling" name automatically and cannot be changed.
To prepare the document(s) to be polled, simply place the document(s) on the ADF and then press the Program Key [P4] to
store or add the document(s) into a polled file.
(Note: If a regular polled file ([FUNCTION][3][2]) is stored in memory, the Program Key [P4] for Continuous Polling will not be
accepted.)
1.3 General Specifications
1. Communication Facility
Public Switched Telephone Network (PSTN)
2. Line Coupling
Direct Coupling
3. Input Level
-5 to -43 dbm
4. Output Level
0 to -15 dbm
5. Control Procedure
ITU-T Rec.T.30
MGCS Proprietary short protocol