Panasonic Panafax UF-585, Service Manual

Page: 262 / 310

262
18 OP CALL TIMER
1 20 sec.
Selecting the length of time that your machine signals (rings) for an
incoming voice call in Fax/Tel Auto Switching mode.
2 30 sec.
3 40 sec.
4 50 sec.
19 OGM LENGTH (TAM I/F) 1 1 sec. Setting the OGM length of your TAM from 1 to 60 second. Unit will
not start to detect SILENT after detecting a call in TAM Interface
mode until the time lapse.
(Default = 20 sec.)
--- ---
60 60 sec.
20 SILENT DETECTION
(TAM I/F)
1 Invalid
Selecting the Silent Detection Mode.
2 Valid
22 SUBSTITUTE RCV
1 Invalid
Selecting whether the machine receives to memory when
recording paper runs out, toner runs out or recording paper is
jammed.
2
Valid
23 RECORDING PAPER
SIZE
1 A4
Setting the recording paper size installed in your machine.
2 Letter
3 Legal
24 PRINT REDUCTION
1 Fixed
Selecting print reduction mode.
Fixed
: Reduce received document according to setting of
Parameter No. 25.
Auto : Reduce received document according to the length of
received documents.
2 Auto
25 REDUCTION RATIO 70 70% Selecting fixed print reduction ratio from 70% to 100%. This
parameter functions only when fixed print reduction is selected on
Fax Parameter No. 24.
---- ----
100 100%
26 POLLING PASSWORD (----) Setting a 4-digit password for secured polling.
27 POLLED FILE SAVE 1 Invalid Selecting whether the machine retains the polled document in
memory even after the document is polled once.
2 Valid
28 STAMP AT MEM. XMT
1 Invalid
Selecting whether the machine stamps the original documents
when storing the documents into memory.
(depending on the Stamp setting on the Control Panel)
2 Valid
30 DRD SERVICE
1 Invalid
Selecting whether or not the machine is available "DRD Service".
If this parameter is set to "Valid", your machine detects the
specified ring pattern only to receive a document automatically.
2 Valid
31 INCOMPLETE FILE
SAVE
1 Invalid Selecting whether the machine retains the document in memory if
the document is not successfully transmitted.
2 Valid
32 COPY REDUCTION
1 Manual
Selecting whether the machine performs the copy reduction ratio
automatically or manually.
Manual :The machine will prompt you for the Zoom ratio (100% to
70%) when making copies.
Auto : The machine will automatically determine the reduction
ratio according to the length of the original document.
2 Auto
Continued on the next page.
No. Parameter
Setting
Number
Setting Comments