Panasonic Panafax UF-585, Service Manual

Page: 146 / 310

146
041 PAUSE TIME 1 = 1 sec.
~
10 = 10 sec. Selects the pause interval from 1 sec. ~ 10 sec. for
dialing through a switchboard or for international
calls.
042 Not used
043 REDIAL INTERVAL 0 = no waiting
~
15 = 15 minutes Selects the redial interval from 0 to 15 minutes in 1
minute steps.
044 REDIAL COUNT 0 = no redial
~
15 = 15 times Selects the redial count from 0 to 15 times in 1 step
intervals.
045 RING DETECT COUNT 1 = 1 ring
~
9 = 9 rings Selects the ring detection count from 1 to 9 rings in
1 ring step intervals.
046 ON-HOOK TIME 0 = 0 sec.
~
90 = 90 sec. Selects the on-hook time between sequential
communication calls in 1 second step intervals.
047 RESPONSE WAIT 1 = 1 sec.
~
90 = 90 sec. Selects the waiting interval for the response after
completing the dialing.
048
049 Not used
050 RING DETECT MODE 1 = Normal
2 = Rough Selects the quality of ringer detection. Use if the
line signal is out of regulation, set to "Rough" so
that the unit may detect the ringing signals.
051 INTERNATIONAL DT MODE
(For Belgium, France and
Spain version only.) 1 = Off
2 = On Selects whether to distinguish the 4-digit
international access code prefix.
052 PULSE RATE 1 = 10 pps
2 = 20 pps Selects the dial pulse rate 10/20 pps.
053
054 Not used
055 BUSY TONE CHECK 1 = Off
2 = On Selects whether to detect the Busy Tone.
056 DIAL TONE CHECK
(Except for USA and Canada
version) 1 = Off
2 = On Selects whether to detect dial tone before dialing
the telephone number.
057 DC LOOP CHECK
(Except for USA and Canada
version) 1 = Off (will not check)
2 = On (checks) Selects whether the unit checks the DC Loop
during communication.
058 COMM.JRNL +IMAGE 1 = Off (without image)
2 = On (with image) Selects whether the machine prints the COMM.
Journal with image.
059 CONFIDENTIAL RCV
REPORT 1 = Off (does not print out)
2 = On (prints out) Selects whether the machine prints the
CONFIDENTIAL RCV REPORT.
060 VERSION Displays the ROM version.
061 TX/RX//PRT/CPY COUNTER TX/RX/PRT/CPY Displays the transmitted, received, total printed and
copied document count.
062 PRINT COUNTER 1 = Off
2 = On Selects whether to print in the Fax Parameter List,
the counter information that is displayed in the
Function Parameter No. 61.
063 Not used
064 SILENT DETECTION TIME
OUT 01 = 1 sec.
~
60 = 60 sec. Selects silent detection timeout time (TAM I/F).
065 SILENT INTEGRATION TIME 01 = 1 sec.
~
10 = 10 sec. Selects ring detection integration time (TAM I/F).
066 RING COUNT (TAM) 1 = 1 ring
~
99 = 99 ring Selects ring detection count 1 to 99 times in one
step intervals on TAM I/F mode.
067 SELF-LEARNING 1 = A4
2 = LETTER Selects the default paper size to be used when the Legal
Size recording paper is replaced with either Letter/A4
size paper without setting the corresponding Recording
Paper Size in the Fax Parameter No. 23.
068 Not used
069 Not used
Function Parameter Table
No. Parameter (see Note 3) Selections Function