Panasonic Panafax UF-585, Service Manual

Page: 148 / 310

148
Note 1:
No. 070 LINE ERROR-Transmit condition of RTP/PIP or RTN/PIN
Note 2:
No. 071 TOTAL ERROR-Transmit condition of RTP/PIP or RTN/PIN
Note 3:
The default setting of parameters depends on the country’s specifications or regulations. Print the Function Parameter List to
confirm the default settings.
Note 4:
Continuous Polling (Station Mode)
This feature allows you to store or add documents into a polled file in memory.
To enable the Continuous Polling feature set Function Parameter No. 003 to "2:Station". The Program Key [P4] will be
assigned with the "Store-4-Polling" name automatically and cannot be changed.
To prepare the document(s) to be polled, simply place the document(s) on the ADF and then press the Program Key [P4] to
store or add the document(s) into a polled file.
(Note: If a regular polled file ([FUNCTION][3][2]) is stored in memory, the Program Key [P4] for Continuous Polling will not be
accepted.)
134 COLLATION (PC) 1 = Off
2 = On
3 = Auto Selects the Print Collation in PC Interface Mode.
When "Auto" is selected, print collation will operate
according to the setting in Fax Parameter #65.
135
~
199
Not used
Signal
Setting
1:128 2:256 3:512 4:1024 5:2048 6:Off
MCF/PIP 0-31 0-63 0-127 0-255 0-511 Always
RTP/PIP 32-63 64-127 128-255 256-511 512-1023 -
RTN/PIN 64-127 128-255 256-511 512-1023 1024-2047 -
Signal
Setting
1:5% 2:10% 3:15% 4:20%
MCF/PIP 0-2 0-4 0-7 0-9
RTP/PIP 3-4 5-9 8-14 10-19
RTN/PIN 5- 10- 15- 20-
Function Parameter Table
No. Parameter (see Note 3) Selections Function