Panasonic NV-HS1000, Service Manual, Page: 51 / 138

1--'
I
�
(D Infrared Remote Control Receiver Window
®
OPERATE Indicator
Lights up when the VTR is turned on.
@ STAND BY Indicator
.Lights up when the AC mains lead is connected and
the VTR is turned off.
@) TIMER REC Indicator
Lights up when the timer recording lunction is on.
@ TAPE IN Indicator
Lights up when a cassette is Inserted.
@
S•VIDEO IN (AV3)
To connect the S-Video cable to a movie camera or lo
another VTR that has a S-Video output socket.
(!) VIDEOIN(AV3)
To connect the video cable to a movie camera or to
another VTR.
@ AUDIOIN(AV3)
To connect the audio cable to a movie camera or to
another VTR.
@
EDIT
To connect a movie camera or another VTR equipped
with an edit socket or an editing controller.
@)
SYN C.EDIT
To connect a movie camera or another VTR equipped
with synchronized editing capability.
(jJ) MI C
To connect a microphone for recording. Once
connected, this socket has priority.
@
PHONES
To connect stereo headphones.
56
16
@) RFOUT
To connect to the aerial terminal on a T V set.
@ NORMAUS-VIDEO OUT/TEST SIGNAL
NORMAL: Normally set to this position.
S-VIDEO OUT (AV1 ):
Set to this position when connecting the
VTR to a T V set equipped with 21-pin
Euro-AV Connector with pins for separate
Y/C signal input.
TEST SIGNAL:
Set to \his position when tuning the T V Into
the VTR.
The test signal Is transmitted on channel
36and AV1.
@)
AUDIOOUT
To connect the sound to a stereo audio system.
@
RFIN
To connect lo the external aerial.
@ CHADJ.
To adjust the RF lransmilling channel 32-40.
@)
AV1
This 21 ·pin scart terminal carries input and output
signals for both picture and sound. TV sets equipped
with a similar socket can be connected here.
This is also called Searl
Peri\el
Euro Connector
Euro AV
I 3 5 7 9 ll 13 IS 17 19
00000000000,,
0000000000
2 4 Ci B 10 12 IA 16 IB 20
57
15
Controls and Connection Sockets
NORMAL (AV1/AV2) S-VIDEO (AV1)
1 AUDIO OUTPUT 1 AUDIO OUTPUT
CH2 (R)
CH2 (R)
2 AUDIO INPUT CH2 (R) 2 AUDIO INPUT CH2 (R)
3 AUDIO OUTPUT 3 AUDIO OUTPUT CH1
CH1 (L) (L)
4 AUDIO GND 4 AUDIO GND
5 BL UE GND 5 No connection
6 AUDIO INPUT CH1 (L) 6 AUDIO INPUT CH1 (L)
7 BL UE 7 No connection
8 SWITCHING
8 SWITCHING
VOLTAGE
VOLTAGE
9 GREEN GND 9 No connection
10 No connection 10 No connection
11 GREEN
11 No connection
12 No connection
12 No connection
13 RED GND 13 No connection
14 BLANKING GND
14 No connection
15 RED
15 C OUT
16 BLANKING 16 No connection
17 VIDEOOUTPUTGND 17 VIDEOOUTPUTGND
18 VIDEO INPUT GND. 18 No connection
19 VIDEOOUTPUT
19 YOUT
20 VIDEO INPUT
20 VIDEO INPUT
21 GND 21 GND
Caution: RGB reservation for only E/E operation when
connecting the Pay T V decoder
@) AV2
To connect to a decoder or another VTR.
•Only used as the input socket.
@)
VtDEOOUT
To connect the video cable to a T V or another VTR.
@ S·VIDEOOUT
To connect the S-Video cable to a T V or another VTR
that has a $-Video input socket.
@ ACIN~
To connect to the main power supply.