Panasonic NV-HS1000, Service Manual

Page: 28 / 138

1,3 2
In addition to setting the VTR clock from the remote
controller,
It
can also be set directly from the VTR.
The built-In clock is used to activate the timer for automatic
recording and must be set to the correct time.
The built-In digital clock employs the 24-hour system.
Operations
1
0
CLOCK
SET
Display Symbols
Preparation
Tum on the VTR.
For Example:
Date; 16th, October, 1999
Time; 20:15
Keep
CLOCK SET
pressed for more than
2seconds.
2
Set each item by pressing
A(+)
or
V
(-) and
SP/LP (NEXT).
3
Note:
66
SP/l.P
0
CLOCK
SET
The clock operates for al least 60 minutes by Its backup
system in the event of power failure.
10
Set
Year
"99".
Set
Month "10".
Set Date "16".
Set Hour "20".
Set Minute "15".
•There Is no need to press SP/LP (NEXT).
Press CLOCK SET.
•The clock will start.
•
Time Reset Function
If the clock is less than two minutes slow or fast,
It
can
easily be reset to the proper time.
For example:
Reselling the clock to 12:00.00
1 Keep CLOCK SET pressed al any lime between
11 :58.00 and 12:01.59 for more than 2 seconds.
2 Press CLOCK SET again as s�on as you hear the
12:00.00 lime signal.
Summer Time Function
Setting to summer time
1 Keep CLOCK SET pressed for more than 2 seconds.
2 Press SLEEP (SHIFT).
•The lime on the clock is advanced by 1 hour.
3 Press ClOCK SET.
Returning from summer time to standard time
1 Keep CLOCK SET pressed for more than 2 seconds.
2 Press SLEEP (SHIFT) twice.
• The lime on the clock is set back by 1 hour.
3 Press CLOCK SET.
•
Setting the Clock of the VTR
11
•