Panasonic NV-HS1000, Service Manual

Page: 30 / 138

Setting Up the Remote
Controller for the ShowView
Programming
This remote controller uses specially designated numbers
called "guide numbers" to differentiate between the TV
stations. Before programming using the ShowView
numbers, you must enter the guide numbers of the TV
stations to be viewed and the programme positions at which
those TV stations are received on the VTR into the remote
controller. Have a newspaper or magazine at hand which
lists the TV station guide numbers and ShowView numbers.
4
3
2,5
Note:
To receive satellite stations, the satellite receiver must be
connected to the VTR and programme position must be set
depending on the type of the connection made.
A 1: When the satellite receiver Is connected to the AV1
socket
A2: When the satellite receiver is connected to the AV2
socket
A3: When the satellite receiver is connected to the
AudioNideo input sockets (AV3)
•When the satellite receiver Is connected by means of the
RF coaxial cable, set to a free programme position
between 1 and 99.
14
Preparation
Set the clock of the remote controller first.
For Example:
TV Station Gulde Number
Programme
Posftfon
ARD 001 1
ZDF 002 2
RTL 004 4
SAT1 005
3
Operations Display Symbols
1
Open the door of the remote controller.
1�;�. "-:--�:--1
2
Keep CLOCK/PRESET pressed for
more than 2 seconds and then press it
again.
0
CLOCK/PRESET
nn,
""'
3
Select the guide number (001-255).
im
'"''
On'
"'
4
Select the programme position
(1-99, A1-A3).
"""
DD:
• To set the other TV stations, repeat steps 3 and 4.
5
Press CLOCK/PRESET twice.
0
CLOCK/PRESET
I
""
' I
r.':,
1
!0 00 Off
.. .. -:-- -:--
6
Close the door of the remote controller.
• •
If you do not know the Gulde Number of a
TV Station
You can set it by figuring it out from the ShowView number
for the programme broadcast by that station.
5
3
4
2,6
15
•
Storing TV Broadcasts into your VTR
Operations Display Symbols
1
Open the door of the remote controller.
2
Keep CLOCK/PRESET pressed for
more than 2 seconds and then press it
again.
0
CLOCK/PRESET
nn,
uu,
3
Enter a ShowView number.
Example: 744286
r::
vr
::::,..---,,,,,,,.."'.,<""•--,
•If you have entered the wrong number, press
CANCEL
and then enter the proper number.
4
Press CONFIRM to set the guide
number.
CONFIRM
5
Select the programme position
(1-99, A1-A3).
006
006
•To set the other TV stations, repeat steps 3 to 5.
6
Press
CLOCK/PRESET
twice.
0
r::
VT
,cm-----,
CLOCK/PRESET
7
Close the door of the remote controller.
Note:
Enter ShowView numbers which are ahead of the present
time. Otherwise, they will not be set Into the proper guide
numbers.
•