Panasonic NV-HS1000, Service Manual, Page: 5 / 138

•
•
•
•
•
SECTIONl
GENER.AL DESCRIPTIONS
1-1. SERVICE INFORMATION
1-1-1. ··K-MECHANISM INFORMATION
A. SERVICE POSITION
When servicing the K-Mechanism, the Mechanism can
easily be- fixed by standing the Mechanism up in the
Main Frame as shown below to check easily.
A-1. CHECKING OF GEAR PHASE ALIGNMENT
CONDITION
1) Remove the Mechanism Connection C.B.A
2) Check gear phase Alignment Condition of
Mechanism described on the bottom side of Frame.
I
; r
J��
Description
_ on the Frame
Fig. S2
Fig. S1
In this position, the following services are possible.
/
<>
-
=- - -
,-
g Q
r-
A-2. CHECKING OF LOADING/UNLOADING OPERATION
There are 3 methods for manual operation of load­
ing/unloading operation as follows.
1. HAND OPERATION
1) Remove the Mechanism Connection C.B.A.
2) Turn the Worm Gear or the WORM WHEEL GEAR
(Remove the Loading Motor Unit) manually .
2. BATTERY OPERATION
1) Remove the Mechanism Connection C.B.A.
2) Connect the Battery (Manganes-Type R6 (AA)
3 pcs./+4.5 V) to the Loading Motor terminals.
3. SERVICE INFORMATION DISPLAY OPERATION
1) Set the Service Information Display mode.
(Press the "FF", "REW" and "EJECT'' buttons simul­
taneously.)
2) Press the "FF", "REW" and "EJECT" buttons 7 times
to set the Service Mode 7. (The end of display on
the Display becomes"--".)
3) In the above Service Information Display mode, the
Loading Motor rotates for Loading operation when
the "PLAY" button is pressed.
The Loading Motor rotates for unloading operation
when the "STOP" button is pressed.
Remark:
Use the "SERVICE INFORMATION DISPLAY" mode for
a final check of mechanism movement.
1-1