Panasonic NV-HS1000, Service Manual

Page: 32 / 138

1--
I
N
Initial Settings Using On Screen Displays
�II
"a'�
I
1
S"ST
II
..
.,_
------
=
III III III III III III III III III III
.... ...
--
..
,
..
-· ·-
-
,.,
.. .... ...
___
-· ·-
Preparation
•Confirm that the TV Is on and the VTR viewing channel Is
selected.
•Tum on the VTR.
Press EDIT MENU.
D
2 Select SETTING. On Screen Display
OSll I.\EffU
0
EDfTING
l:!Dll!iJ
COOTROL CAalE 1S NOT
CONNECTED
!lb
m
:11:i·•
3 Press ENTER.
SHWlG
mm,
l:,'a:@a:l\iiill-1Jiii!O
DEMONSTRATION
CJ
LMmUAGE
To select the Desired Language
Select one of the seven languages displayed: English,
German, French, Italian, Spanish, Dutch and Swedish.
Follow steps 1 to 3 of the above procedure.
4 Select LANGUA(lE.
5 Select the desired language.
0
IEl!III
➔
C]
SITTING
SERAflCH WITH SOtn.'D
�ATKIN
LANGUAGE
-
DlUISCH
fRAN�AIS
ITAl!li"H)
fSPAt/Ol
N£D£/llAIIOS
SVEkSKA
smct
aa.•
PREVIOUS PAGE a
18
To select Sound Setting
Follow steps·1 to 3 of the above procedure.
4 Select SEARCH WITH SOUND.
0 .....
➔
C]
5 Select the desired setting.
0 ......
➔
C]
""""
M9
&a-WM!
D[MONSlRATION
l»IGUAGE
SEAflCH WITH SOOND
BIii ON Off
�Wilm PAGE
ii·-
AUTO: The sound can be heard during special playback
only when an editing operation Is In progress.
ON: The sound can be always heard during special
playback.
OFF: The sound
can
not be heard during special
playback.
To View a Demonstration
Follow steps 1 lo 3 of the above procedure.
4 Select DEMONSTRATION.
SETTING
SERAflCH WITH SOUND
•The On Screen Displays for editing are displayed one
after the other at about live second Intervals.
• •
Optional Function
VITC (Vertical Interval Time Code)
Function
As an address (individual number) Is recorded for each
frame, It Is possible to find the accurate position of any
desired scene or picture on a tape by checking the address
during playback. This address Is called "Time Code".
Since \he VITC signals (Vertical Interval Time Code) are
recorded together with the picture signals, they will not be
cancelled even when the video cassette Is taken out from
the VTR or the VTR Is switched off. This makes It possible
to check the precise position of any desired picture at any
time.
•The VITC function becomes operative when the VTR Is
equipped with the optional VITC adaptor. Consult your
authorized video dealer.
Follow steps 1 to 3 of the above procedure.
4 Select EDITING WITH VITC.
5 Select the desired setting.
SELECT
PREVIOUS
EDITING WITH VITC
OH 11111
ON: For reading the VITC signals during playback and
writing them during recording.
The time code Is indicated on the counter In
Increments of hours, minutes and seconds. During
programme editing, it appears on the screen In
increments of hours, minutes, seconds and
frames (25 frames per second).
OFF: The normal counter ls displayed.
•
19
Initial Settings Using On Screen Displays
Reading the VITC signals
"-:--.--" appears on the counter when the cassette Is
Inserted. When playback Is started, the VITC signals are
read and the time code Is displayed.
•When VITC signals have not been written on the tape, the
time code Is not displayed.
Writing the VITC signals
"-:--.--" appears on the counter when the cassette Is
Inserted. When recording Is started, the VITC signals are
written starting at 0hOOmOOs00f.
If recording Is started after the tape has been played back
and the VITC signals read, the VITC signals will be written
following on from the time code which Is displayed on the
counter at that time.
Notes:
•To use the VITC function lo edit, be sure to first turn on the
VITC function with the procedure described above, !hen
begin editing after cancelling all editing programmes used
last time.
•When tracking Is out of adjustment, the VITC signals may
not be property read.
• The counter cannot be reset when !he VITC function Is on.
This Is because the VITC signals are recorded on the
tape.
•When !he VITC function Is on, up to 50 scenes can be
programmed In the programme assemble editing mode.
If the VTR Is not equipped with the optional VITC adaptor,
a maximum of 10 scenes can be programmed using the
counter.
• To make optima! use of the advantages offered by the
VITC function during editing, this VTR should be
connected to another NV-HS1000 also equipped with the
VITC function.
When this VTR Is to be connected to another uni! which Is
not equipped with the VITC function, the editing precision
will be Increased If the NV-HS1000 Is used as the
playback VTR.
•