Panasonic NV-HS1000, Service Manual

Page: 31 / 138

•
Setting the:: Remote Controller for Operation of
yourTV
You can operate some manufacture of TVs (see table
below) using the supplied remote controller after this setting
up.
Number
Manufacturer
1
2
Panasonic
3
4
5
GRUNDIG/Blaupunkt
6
PHILIPS
7 SONY
16
Preparation
•Turn on the TV.
•Install the batteries in the remote controller.
Operations Display Symbols
1
Open the door of the remote controller.
2
Keep
CLOCK/PRESET
pressed for
more than 2 seconds and then press it
twice.
3
0
CLOCK/PRESET
•''TV" now appears on the remote controller's
display.
Press OFF several times.
.. ffi
-�
•When the number mat�hes the manufacturnr of
your TV, the TV's power Is turned off.
4
Press CLOCK/PRESET.
0
�
vr
=.�,---�
CLOCKA'AESET
5
Close the door of the remote controller.
When lhe number Is 1, 2, 3 or 4:
When the TV's power is turned off in step 3 above, turn it
back on and adjust the TV's volume using this remote
controller. The volume can be adjusted if the number
matches the manufacturer of TV. If It is not possible lo
adjust the TV's volume,
try
setting the number (1 to 4) to
match the manufacturer of TV again until the volume can be
adjusted.
Nole:
Some TV models cannot be operated using this remote
controller.
, •
Setting the Remote Controller for Operation of yo'!r TV
Power Source for the Remote
Controller
The remote controller is powered by 2 "UM3" or "R6" size
batteries. The life of the batteries is about one year,
although this depends on the frequency of use.
Precautions for Battery Replacement
•Load the new batteries with their polarity($ and 8)
aligned correctly.
•Do not apply heat to the batteries, or an Internal
short-circuit may occur.
• If you do not intend to use the remote controller for a long
period of time, remove the batteries and store them In a
cool and dry place.
• Remove spent batteries immediately and dispose of them.
•Do not use an old and a new battery together, and never
use an alkaline battery with a manganese battery.
Installing the Batteries
17