Panasonic KXMB2000E Operating Instructions Manual Download Page 76

Page: 76 / 120

10.1 Report messages (KX-MB2025/KX-MB2030 only)

To indicate the unit’s fax transmission/reception status, one of the following messages will be printed on the sending
and journal reports (page 41).

Message

Code

Cause & Solution

COMMUNICATION ERROR

40-42
46-72

A transmission or reception error occurred. Try
again or check with the other party.

43
44

A line problem occurred. Connect the telephone line
cord to a different socket and try again.

An overseas transmission error occurred. Try using
the overseas mode (feature #411 on page 60).

DOCUMENT JAMMED

-----

Remove the jammed document (page 93).

ERROR-NOT YOUR UNIT

53
54
59
70

A transmission or reception error occurred because
of a problem with the other party’s fax machine.
Check with the other party.

JUNK FAX PROH. REJECT

-----

The junk fax prohibitor feature of this unit rejected
fax reception.

MEMORY FULL

-----

The memory is full of received documents due to a
lack of recording paper or a recording paper jam.
Load paper (page 14) or remove the jammed paper
(page 88).

If the PC fax setting (feature #442 on page 63) is set
to

“

ALWAYS

”

, check the connection between the

computer and the unit.

If your unit is connected to the computer via the LAN
and the fax preview mode (feature #448 on
page 52) is set to

“

”

, view, print or save the

documents on the web browser, and then erase
unnecessary documents (page 52).

NO DOCUMENT / FAILED PICKUP

-----

The document was not fed into the unit properly.
Re-insert it and try again.

OTHER FAX NOT RESPONDING

-----

The other party’s fax machine is busy or has run out
of recording paper. Try again.

The other party’s fax machine rings too many times.
Send the fax manually (page 41).

The other party’s machine is not a fax machine.
Check with the other party.

The number you dialled is not in service.

PRESSED THE ‘Stop’ KEY

-----

R M

Stop

was pressed and fax communication was

cancelled.

THE COVER WAS OPENED

-----

The top cover was opened. Close it and try again.

-----

Fax transmission or reception was successful.

10. . Help

10. Help

Summary of Contents for KXMB2000E

























































































































Search results

Summary of Contents for KXMB2000E

Reviews:

Related manuals for KXMB2000E

Brands by name

Popular brands

Panasonic KXMB2000E, Operating Instructions Manual

Search results

Summary of Contents for KXMB2000E

Reviews:

Related manuals for KXMB2000E

Brands by name

Popular brands