Panasonic KXMB2000E Operating Instructions Manual Download Page 59

Page: 59 / 120

Feature/Code

Selection

Holding the previous contrast
setting

MBNM

“

DISABLED

”

(default): Deactivates this feature.

“

ENABLED

”

: The unit will hold the previous setting.

Note:

The previous setting will be held individually for copying.

The previous setting will be held individually for sending faxes (KX-MB2025/
KX-MB2030 only).

Setting the default operation
mode

MBNM

(KX-MB2025/KX-MB2030
only)

To select the default operation mode when the selected time of the mode timer
(feature #464) passes.

“

COPY

”

(default): Copy mode is selected as default.

“

FAX

”

: Fax mode is selected as default.

Note:

You cannot select the scan mode using this feature.

Setting the default operation
mode timer

MBNM

(KX-MB2025/KX-MB2030
only)

To set the timer before returning to the default operation mode (feature #463).

“

OFF

”

: Deactivates this feature.

“

30s

”

: 30 seconds

“

1min

”

(default): 1 minute

“

2min

”

: 2 minutes

“

5min

”

: 5 minutes

Setting toner save feature

MBNM

“

OFF

”

(default): Deactivates this feature.

“

”

: The toner cartridge will last longer.

Note:

This feature may lower the print quality by reducing toner consumption.

This setting is valid for copying, and when the unit automatically prints
reports/lists.

This setting is invalid for printing received faxes (KX-MB2025/KX-MB2030
only).

8. Programmable Features

Summary of Contents for KXMB2000E

























































































































Search results

Summary of Contents for KXMB2000E

Reviews:

Related manuals for KXMB2000E

Brands by name

Popular brands

Panasonic KXMB2000E, Operating Instructions Manual

Search results

Summary of Contents for KXMB2000E

Reviews:

Related manuals for KXMB2000E

Brands by name

Popular brands