2.9 Your fax number (KX-MB2025/
KX-MB2030 only)
You can program your fax number so that it appears on
the top of each page sent.
MFNMEN
M
Set
N
M
Recall
N
M
Stop
N
M
Menu
N
1
M
Menu
N
A
MBNM
1
NM
0
NM
3
N
A
M
Set
N
2
Enter your fax number, up to 20 digits.
R
To enter a “+”, press
MGN
.
R
To enter a space, press
MBN
.
R
To enter a hyphen, press
M
Recall
N
.
R
To erase a number, press
M
Stop
N
.
3
M
Set
N
4
Press
M
Menu
N
to exit.
To correct a mistake
Press
MFN
or
MEN
to move the cursor to the incorrect
number, and make the correction.
R
To erase all numbers, press and hold
M
Stop
N
.
2.10 Configuring the unit to
access the LAN (KX-MB2000/
KX-MB2010/KX-MB2030 only)
You can print documents, scan documents, receive
faxes or send faxes (KX-MB2030 only) using a computer
connected to the LAN. To enable these features, you
need to set the IP address, subnet mask, and default
gateway in the unit.
Important:
R
Consult your network administrator when setting
the IP address, subnet mask, and default
gateway.
2.10.1 Setting up automatically with a DHCP
server
Your situation:
– When only one unit is connected to the LAN.
If your network administrator manages the network with
a DHCP (Dynamic Host Configuration Protocol) server,
it will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
1
After connecting the LAN cable to the unit and the
computer, turn the power switch ON.
R
The IP address, subnet mask, and default
gateway will be set automatically.
2
Install Multi-Function Station on the computer that
you want to use it with. See page 24 for details.
Note:
R
You can connect two or more units and assign IP
addresses automatically with a DHCP server, but we
recommend assigning static IP addresses manually
for each unit to avoid network access and
configuration troubles.
2.10.2 Setting up manually
Your situation:
– When your network administrator does not manage
the network with a DHCP server.
– When two or more units are connected to the LAN.
You need to assign an IP address, subnet mask, and
default gateway manually.
1
M
Menu
N
2
Press
MBNM
5
NM
0
NM
0
N
to display
“
DHCP
”
.
3
Press
M
0
N
to select
“
DISABLED
”
.
A
M
Set
N
4
Set each item.
For the IP address:
1.
Press
M
5
NM
0
NM
1
N
to display
“
IP ADDRESS
”
.
A
M
Set
N
2.
Enter the IP address of the unit.
A
M
Set
N
23
2. Preparation
