Panasonic KXMB2000E Operating Instructions Manual Download Page 70

Page: 70 / 120

Feature/Code

Selection

IP filtering for the LAN
connection

MBNM

“

DISABLED

”

(default): Deactivates this feature.

“

ENABLED

”

: The unit will deny/approve access from the pre-programmed

IP patterns. You can program whether to deny or approve IP addresses. Up to
4 patterns each for IPv4 and IPv6 can be programmed through the web browser
interface.

Start Multi-Function Station.

2. [Utilities]

[Configuration Web Page]

[Network Configuration]

Type

“root”

as the user name, then enter the password (feature #155 on

page 56).

[OK]

Select the

[LAN FEATURE]

tab.

Click

[Edit]

next to

[IP FILTERING]

Click

[Edit]

next to

[FILTER (IPv4)]

[FILTER (IPv6)]

Change the mode and edit IP filtering information.

[Submit]

Close the web browser.

Setting the IP address
automatically for the LAN
connection

MBNM

This feature will be displayed only when feature #500 is activated.

“

DISABLED

”

(default): Deactivates this feature.

“

ENABLED

”

: IP address will be allocated automatically without using a

DHCP (Dynamic Host Configuration Protocol) server.

Setting HTTPD for the LAN
connection

MBNM

“

DISABLED

”

: Denies access to the web browser.

“

ENABLED

”

(default): Allows access to the web browser.

IPv6 protocol

MBNM

“

DISABLED

”

(default): Deactivates this feature.

“

ENABLED

”

: IPv6 protocol can be used. After installing the printer driver,

be sure to change the port to IPv6 protocol. You can check the IPv6 protocol
address by printing the

“

SETUP LIST

”

(page 99).

Note:

To activate this feature, you need to turn the power switch of the unit OFF,
then ON.

Setting the primary WINS
server for the LAN
connection

MBNM

This feature is available when feature #500 is deactivated.

Menu

MBNM

Set

Enter the primary WINS server of the network on the LAN using the dial
keypad.

Set

Menu

Setting the secondary WINS
server for the LAN
connection

MBNM

This feature is available when feature #500 is deactivated.

Menu

MBNM

Set

Enter the secondary WINS server of the network on the LAN using the dial
keypad.

Set

Menu

8. Programmable Features

Summary of Contents for KXMB2000E

























































































































Search results

Summary of Contents for KXMB2000E

Reviews:

Related manuals for KXMB2000E

Brands by name

Popular brands

Panasonic KXMB2000E, Operating Instructions Manual

Search results

Summary of Contents for KXMB2000E

Reviews:

Related manuals for KXMB2000E

Brands by name

Popular brands