Panasonic KXMB2000E Operating Instructions Manual Download Page 21

Page: 21 / 120

2.6 Adjusting the volume
(KX-MB2025/KX-MB2030 only)

Important:

Before adjusting the volume, set the operation
mode to fax mode. If the

Fax

light is OFF, turn

it ON by pressing

Fax

MCNMDN

Set

Fax

Ringer volume
While the unit is idle,

press

MCN

MDN

To turn the ringer OFF

Press

MCN

repeatedly to display

“

RINGER OFF= OK?

”

Set

The unit will not ring.

To turn the ringer back ON, press

MDN

Monitor volume
While using the monitor,

press

MCN

MDN

2.7 Date and time

We recommend you to set the date and time. The other
party will receive your unit’s date and time as the header
information.

MFNMEN

Set

Menu

Fax

Menu

MBNM

Set

Enter the current date/month/year by selecting 2
digits for each.

Example: 3 August, 2010

Enter the current hour/minute by selecting 2 digits for
each.

Example: 10:15 PM (12 hour clock format)
1.

Press

MGN

repeatedly to select

“

”

Press

MGN

repeatedly to select

“

”

“

”

, or

24-hour time entry.

Set

Press

Menu

to exit.

Note:

To check the current date and time setting, press

Fax

to temporarily change the unit to the fax mode

(KX-MB2025/KX-MB2030 only).

Your unit’s date and time will be used as the header
information for the following:
– When sending as an attached file to an email

destination directly from this unit (Scan to email
address) (page 31) (KX-MB2000/KX-MB2010/
KX-MB2030 only).

– When sending faxes (page 41) (KX-MB2025/

KX-MB2030 only).

If the date and time is not set correctly, the other party
will receive an incorrect date and time as their
header. This may confuse the other party.

To correct a mistake

Press

MFN

MEN

to move the cursor to the incorrect

number, and make the correction.

If you have subscribed to a Caller ID service
(KX-MB2025/KX-MB2030 only)

The date and time will be automatically set according to
the received caller information.

If the time has not previously been set, Caller ID will
not adjust the clock.

2. Preparation

Summary of Contents for KXMB2000E

























































































































Search results

Summary of Contents for KXMB2000E

Reviews:

Related manuals for KXMB2000E

Brands by name

Popular brands

Panasonic KXMB2000E, Operating Instructions Manual

Search results

Summary of Contents for KXMB2000E

Reviews:

Related manuals for KXMB2000E

Brands by name

Popular brands