Panasonic KXMB2000E, Operating Instructions Manual

Page: 32 / 120

1. Set the original (page 19).
2. M Scan N
3. Using station 1–3:
Press the desired station key.
Using station 4–6:
Press M Lower N , then press the desired station
key.
4. M Set N A M Start N
4.1.6 Scan to FTP server (KX-MB2000/
KX-MB2010/KX-MB2030, LAN connection
only)
You can send the scanned image to a folder on an FTP
server.
Important:
R Program the FTP server settings beforehand
(page 68).
1
Set the original (page 19).
2
M Scan N
3
Press MCN or MDN repeatedly to select “
FTP
SERVER
” . A M Set N
4
Press MCN or MDN repeatedly to select the destination
to which you want to send the scanned image. A
M Set N
5
If necessary, change the scanning settings. Press
MEN , press MCN or MDN repeatedly to select the desired
setting. A M Set N
6
M Start N
R The scanned image will be automatically saved
in the selected folder on the FTP server.
Note:
R To stop scanning, see page 75.
R You can save the images in TIFF, JPEG or PDF
formats.
R To display the scanned image, download the data to
your computer beforehand.
4.1.7 Scan to SMB folder (KX-MB2000/
KX-MB2010/KX-MB2030, LAN connection
only)
You can send the scanned image to a folder on the
network.
Important:
R Program the SMB folder settings beforehand
(page 68).
1
Set the original (page 19).
2
M Scan N
3
Press MCN or MDN repeatedly to select “
SMB
FOLDER
” . A M Set N
4
Press MCN or MDN repeatedly to select the folder to
which you want to send the scanned image. A
M Set N
5
If necessary, change the scanning settings. Press
MEN , press MCN or MDN repeatedly to select the desired
setting. A M Set N
6
M Start N
R The scanned image will be automatically saved
in the selected folder on the network.
Note:
R To stop scanning, see page 75.
R You can save the images in TIFF, JPEG or PDF
formats.
R If this function does not perform properly, consult
your network administrator. This unit’s SMB function
does not support NTMLv2 and SMB signatures.
32
4. Scanner